ZONCAR AC A/C Compressors with Clutches For Dodge Sprinter 2500 3500 2003-2006

Description: Headlight Headlamp Assembly for 07-13 Toyota Tundra 08-17 Sequoia Chrome Housing Toyota Tundra Headlight Housing from KAC, Replacement Headlight Assembly for 2007-2011 Toyota Tundra, OE# 81150-0C050 / 81110-0C050 Left and right side original equipment replacement headlight assembly for 2007-2011 Toyota Tundra. Replacement OEM part numbers: 81150-0C050 / 81110-0C050 These direct aftermarket replacement headlight assemblies are 100% OE standard, produced by suppliers from the automotive OEM market and are SAE/DOT approved. Please note that bulbs are not included KAC replacement headlight assemblies exactly match the specifications of the original manufacturer's design and no modification is needed. Wiring, switch and screws not included The beam level can be adjusted with adjusters. Made with the highest grade components for premium reliability and performance, offers enhanced visibility and meets all relevant safety standards Clear lens for superb clarity, IP65-rated water-resistant and durable to withstand all weather conditions, with vent holes in the housing to avoid moisture and fogging problems Product Description Designed for: for 2007-2013 Toyota Tundra for 2008-2017 Toyota Sequoia (Attention: Not suitable for vehicle with electric adjustment function) Lens color: Clear headlight/Amber side marker Part replaces these OE numbers: 81150-0C050/81110-0C050/DEPO 312-11A3L-AF/Partslink TO2503171/Partslink TO2502171/TYC 20-6847-00-1/Hollander 114-50458L/Hollander 114-50457R/TYC 20-6848-00-1/DEPO 312-11A3R-AF Bulbs: High beam – 9005, low beam – H11 (Bulbs NOT included) KAC original replacement headlight assemblies are made from premium components and manufactured to the highest standards. This replacement fog light assembly offers reliability and long-lasting performance. This aftermarket headlight assembly for 2007-2011 Toyota Tundra is a direct OE replacement that has been built to match the exact specifications of the original manufacturer’s. The clear lens offers enhanced road illumination and improved visibility. Note: Due to lighting effect, monitor's brightness etc, there could be some slight differences in the color between the photo and the actual item Item Specifics Brand KAC Lighting Technology Halogen Headlight Style Reflector Placement on Vehicle Left,Right,Front Housing Color Chrome Lens Color Clear Fitment Type Direct Replacement Assembly Type Sealed Manufacturer Warranty 5 Years Bulb High beam – 9005, low beam – H11 (Bulbs NOT included) Bulbs Included No Fitment 2007-2011 Toyota Tundra Type Headlight Assembly Finish Powder-Coated OE/OEM Part Number 81150-0C050/81110-0C050 Other Part Number DEPO 312-11A3L-AF/Partslink TO2503171/Partslink TO2502171 Other Part Number2 TYC 20-6847-00-1/Hollander 114-50458L/Hollander 114-50457R Other Part Number3 TYC 20-6848-00-1/DEPO 312-11A3R-AF Features DOT-Certified Warranty & Return Policy 1) KAC offers 5 years warranty and a 60 days free return. Disclaimer: KAC provides a 60-Day easy return satisfaction guarantee. Items to be returned must be in original factory condition. 2) We offer a free return & money-back guarantee. If you are not satisfied with the product for any reason, you can return the item for refund or replacement/exchange. All returns must include the original packaging. (Please refer to our return policy for details.) If you have any questions, please contact us via eBay message. 3) Any items damaged because of incorrect installation will not be refunded. 4) Unauthorized reselling of KAC products is strictly prohibited and we can't honor the warranty if purchasing from an unauthorized reseller. Payment 1) KAC accepts all major credit cards via PayPal: MasterCard, Visa, American Express and Discover. 2) We will only ship to the confirmed PayPal shipping address given with the payment. 3) If you want to ship to aother address, please change your PayPal shipping address before you make payment. 4) To avoid initiating an unpaid item claim, please pay within 7 days. Shipping Policy 1) We will ship items locally for US buyers. Usually, for US buyers it will take about 5-7 business days to reach. If you don't get it, please contact us firstly, we'll try our best to support you. 2) For US customers, all items will be shipped out within 1-2 business days with cleared payment. Please include your phone number in the payment note for prompt and secure shipment. 3) Tracking numbers for all orders are added to eBay once they have been dispatched; please log in to eBay to find the tracking information for your order. Contact Us If you have ANY questions with shipping, product or service, please Contact Us first before leaving feedback/write a review or filing a return case. We will solve the problem! We always put our customers first and your satisfaction is guaranteed. Our KAC Tech's are here to serve you. Email us and our expert team will swiftly diagnose the issue and offer the best solution within 12-24 business hours. All off-hours emails will be answered within 24-48 hours. About KAC Dedicated to building the most competitive auto lighting brand, KAC has built an expert technical team to work out the higher performance LED lighting solutions and established a long-term partnership with many high-quality suppliers in the industry who can provide us with quality parts and chips all at an extremely competitive price through the long-lasting efforts. All the cooperated suppliers are selected strictly by the expert and experienced team of KAC. Adhering to the brand principle ---The high-quality material creates excellent products and the brand slogan---Light Up You More, KAC has committed to do our utmost to serve more vehicles models with the most competitive products both in price and service, including headlights, foglights, headlight assembly, etc., aiming at the largest group of customers. Paired with our innovative technologies, fast shipping and satisfaction guarantee, we’re able to ensure that all the customers can get the product when they need it. DESCRIPTION PAYMENT SHIPPING RETURN POLICY CONTACT US ZONCAR AC A/C Compressors with Clutches For Dodge Sprinter 2500 3500 2003-2006 AC Compressors: Compressors are the heart of the A/C system, with a heavy responsibility to pump A/C refrigerant throughout the automobile’s A/C system. We take the upmost care when developing new compressors. We always make sure that our new compressors meet exact specifications, When you purchase a new compressor from Topcn, you are receiving a high quality product at price that is very affordable. Feature: 【PREMIUM ALUMINUM QUALITY】- Excellent material adopts fine workmanship with a stable structure. It is wear-resistant, anti-corrosion, and anti-rust. 【STRONG COOLING FUNCTION】- Fabulous compression ability effectively improves the cooling effect. Good heat dissipation and ventilation will not cause load and damage to the water tank radiator. 【LOW NOISE & FUEL CONSUMPTION】- Low output power can reduce motor load and fuel consumption during work; Effective environmental protection conforms to energy saving. A small vibration amplitude provides more comfortable and low noise. 【EASY INSTALLATION】- Effective detection function tested carefully before its delivery. No need to weld or adjust during installation. 【VEHICLE Fit For MENT】- It is highly compatible with most air-conditioning compressors of corresponding car models. The overall performance of the car improved. Fit For For: 12105111,5097010AA,639307,CS20084,4710293,4711293,11105111,7511631,7512187,295067NA,5839,5844,0002302011,254442,CO105111C,1520971,DW77356,10343180,10347421,10105111,77356,78356,2041697,5511631,5512187,6511631,6512187 Interchange Part Number: For chrysler Crossfire 3.2l 2004-2008 For dodge Sprinter 2500 2.7l 2003-2006 For dodge Sprinter 3500 2.7l 2003-2006 For Freightliner Sprinter 2500 2.7l 2002-2006 For Freightliner Sprinter 3500 2.7l 2002-2006 For mercedes-benz C220 2.2l 1996-1996 For mercedes-benz C230 2.3l 1997-2000 For mercedes-benz C280 2.8l 1996-2000 For mercedes-benz C36 Amg 3.6l 1996-1997 For mercedes-benz C43 Amg 4.3l 1998-2000 For mercedes-benz Cl500 5.0l 1998-2000 (with 7sb a/C Compressor;) For mercedes-benz Cl55 Amg 5.5l 2001-2001 For mercedes-benz Clk320 3.2l 1998-2003 For mercedes-benz Clk430 4.3l 1999-2003 For mercedes-benz Clk55 Amg 5.5l 2001-2002 For mercedes-benz E300 3.0l 1996-1999 For mercedes-benz E320 3.2l 1996-2002 For mercedes-benz E420 4.2l 1997-1997 For mercedes-benz E430 4.3l 1998-2002 For mercedes-benz E55 Amg 5.5l 1998-2002 For mercedes-benz Ml320 3.2l 1998-2002 For mercedes-benz Ml430 4.3l 1999-2001 For mercedes-benz Ml55 Amg 5.5l 2000-2000 For mercedes-benz S320 3.2l 1996-1999 For mercedes-benz Slk230 2.3l 1998-2004 For mercedes-benz Slk320 3.2l 2001-2004 For mercedes-benz Slk55 Amg 5.4l 2005-2008 For mercedes-benz Slk55 Amg 5.5l 2005-2008 Installation Method 1. Remove compressor: Remove the A/C belt from the A/C compressor pulley. May involve loosening the belt tensioner (if equipped). 2.receiver drier or accumulator, orifice tube or expansion valve. 3.Disconnect the negative battery cable. 4.Remove the bolt that secures refrigerant lines to the A/C compressor. Inspect A/C lines for any contamination such as metal or excessive dirt inside of them. If you find any contamination the system will need to be cleaned.Flush the condenser and evaporator using NON-OIL BASED A/C flush. On expansion valve systems. The valve must be removed before the evaporator can be flushed. Flushed condensers from outlet to inlet and evaporators from inlet to outlet. 5.Drain all the oil from the new compressor ,if you compressor has a drain plug you will need to open it up and drain what oil is in there too. 6.Install half oil charge into the compressor and the remainder throughout the system. Turn compressor shaft 8-10 full revolutions to insure front seal and other internal parts are lubricated. 7.Install new receiver drier or accumulator and new orifice tube or expansion valve. 8.Evacuate the A/C system for a minimum of one hour. 9.After evacuation install half the refrigerant charge and let the system set for 1 minute. This will allow the refrigerant to pick up oil and spread more evenly throughout the system. 10.Turn on the A/C system with the engine running and check to see if cold air is now coming out of the air duct. 11.If the A/C system is functioning ,you may find that your electric radiator fan and compressor clutch will be cycling off and on depending on the outside air temperature Automobile Air Compressor Installation Instruction: I. The function of air compressor is to compress air, not to cool air. A product that has no signs of leakage, abnormal sound and has sufficient pressure can be certificated as a qualified product. II. If the original automobile compressor is broken, it indicates the original automobile air conditioning system has already failed. The causes of the failure can be summarized as follows: (1) Poor heat dissipation and too much fluoride will cause impressively high pressure, overwhelming the capacity of the compressor and causing components of the connection rod broken or burning lock; (2)Because of too long vehicle service, the compressor is aging seriously and produces organic carbide ,which will impede water from being drained out by making the pipes blocked or the deliquefaction jar invalid, resulted in pipeline ice blockage; (3)The installed pipe assembly isn't fixed properly, resulted in air leakage. III. The following steps shall be followed before the replacement of the compressor: (1) Clean all pipes of the air conditioning system individually, inject cleaning agent into the condenser and evaporator and soak them for about 20 minutes. Pour out the cleaning agent and dirt with high-pressure nitrogen. The deliquefaction jar, fluid collector and throttle shall not be cleaned; make sure that no residue of the cleaning agent remains in the system; desiccate the refrigerant circuit, if necessary; (2)Clean the surface of the condenser and evaporator, check if the cooling fans' speed is normal; (3)Clean or replace the expansion valve; the deliquefaction jar and pipe filter shall be replaced; (4) Check and correct oil filling level and oil viscosity before installing the compressor; vacuumize, fill fluorine, check high pressure and low pressure. Usually, the normal ranges of high pressure and low pressure are 180-200Psi and 30-40Psi respectively. If the pressure is abnormal, diagnose and troubleshoot first before installing the compressor; (5)Check and correct oil filling level and oil viscosity before installing the compressor. Note: Be sure to clean the air conditioning system before installation, otherwise it will cause compression broken. If the original automobile compressor is jammed and shows cylinder scoring, make sure to clean the pipes and replace the heatsink net. Because the specific characteristics of the heat sink net, the above mentioned problems would produce Aluminum scrap, iron powder and residues that cannot be eliminated. Warranty will not be provided in case of the following circumstance: install the compressor without cleaning the pipes and replacing the heatsink net, which would cause cylinder scoring and lock of the newly installed compressor immediately. Warranty & Return Policy Requirements Rule A: Unused merchandise in its original packaging. Rule B: The outer packaging is not damaged in any way. How to handle the return? 1: Contact the seller first 2: Send pictures: outer packaging, scanned labels, the item itself and complete accessories, etc. 3: Receive a return label 4: Item delivery - Payment reimbursement (Returns or exchanges will be charged a 15% restocking fee on the original purchase, as well as the return shipping fee and the exchange shipping fee. Exchanges due to shipping errors will not be charged a restocking or shipping fee.) Return Priority: No Returns or Exchanges Shipping costs are the responsibility of the buyer in the following cases 1: Ordering error 2: Found a better price 3: Change of mind Warm Tips Lost accessories/quality problem/shipping damage etc. Please contact us first for a good solution instead of filing a return dispute. Payment 1) KAC accepts all major credit cards via PayPal: MasterCard, Visa, American Express and Discover. 2) We will only ship to the confirmed PayPal shipping address given with the payment. 3) If you want to ship to aother address, please change your PayPal shipping address before you make payment. 4) To avoid initiating an unpaid item claim, please pay within 7 days. Shipping Policy 1) We will ship items locally for US buyers. Usually, for US buyers it will take about 5-7 business days to reach. If you don't get it, please contact us firstly, we'll try our best to support you. 2) For US customers, all items will be shipped out within 1-2 business days with cleared payment. Please include your phone number in the payment note for prompt and secure shipment. 3) Tracking numbers for all orders are added to eBay once they have been dispatched; please log in to eBay to find the tracking information for your order. Contact Us If you have ANY questions with shipping, product or service, please Contact Us first before leaving feedback/write a review or filing a return case. We will solve the problem! We always put our customers first and your satisfaction is guaranteed. Our KAC Tech's are here to serve you. Email us and our expert team will swiftly diagnose the issue and offer the best solution within 12-24 business hours. All off-hours emails will be answered within 24-48 hours. About KAC Dedicated to building the most competitive auto lighting brand, KAC has built an expert technical team to work out the higher performance LED lighting solutions and established a long-term partnership with many high-quality suppliers in the industry who can provide us with quality parts and chips all at an extremely competitive price through the long-lasting efforts. All the cooperated suppliers are selected strictly by the expert and experienced team of KAC. Adhering to the brand principle ---The high-quality material creates excellent products and the brand slogan---Light Up You More, KAC has committed to do our utmost to serve more vehicles models with the most competitive products both in price and service, including headlights, foglights, headlight assembly, etc., aiming at the largest group of customers. Paired with our innovative technologies, fast shipping and satisfaction guarantee, we’re able to ensure that all the customers can get the product when they need it. All rights reserved. On May 27, 2023 at 07:12:07 PDT, seller added the following information: NEW LISTING Power Steering Rack & Pinion Assembly for Honda Ridgeline 2006-2013 2014 V6 3.5L USD230.0 Fit For DODGE DAKOTA 1997-2004 DURANGO 1999-03 Power Steering Rack&Pinion 97-338 USD200.0 Power Steering Rack&Pinion Assembly for Honda Ridgeline 2006-2011 2012 2013 2014 USD230.0 For 2012-2017 Toyota Camry Floor Mats Left+Right+Front+Second Row Black VIWIK US USD75.99 For 2012-2017 Toyota Camry Floor Mats Left+Right+Front+Second Row Black KYX New USD73.99 On Nov 1, 2024 at 04:04:14 PDT, seller added the following information:

Price: 114.99 USD

Location: Texas

End Time: 2024-12-18T20:26:25.000Z

Shipping Cost: 0 USD