Speedway Universal Bucket Seat Sliders, Adjustable, Pair, Hotrod / Classic Truck

Description: Extensive Adjustability: Provides up to 7 inches of front-to-rear adjustment, allowing drivers and passengers to find their ideal seating position for comfort and driving control in any hot rod or muscle car., Robust Design & Construction: Each set includes a pair of bracket sliders equipped with dual locking ball bearing mechanisms for smooth, stable seat adjustments and positive retention, enhancing both safety and usability. Assembled dimensions are 12-1/2 inches long by 3-1/4 inches wide., Universal Compatibility: While designed to directly fit Speedway's universal bucket seat mount frame, these sliders may require minor modifications for use with other seat mounts and plates, offering versatile application across various custom projects., Installation Requirements: Note that mounting Speedway Universal Bucket Seat Slider Tracks Sku # 91070026 Mfr. Part # 91070026 Condition New Brand Speedway Motors Sold Set Details Info Dual locking ball bearing seat sliders for smooth seat adjustment and positive retention Seat sliders provide 7 inches of front-to-rear adjustment for driver/passenger comfort Seat sliders have an assembled height of 1-1/2-inches Assembled dimensions of 12-1/2-inches long by 3-1/4-inches wide (including handle) Does NOT include fasteners to mount to floor frame adapter or seat Seat slider studs are 5/16-18 thread and 1-inch long Seat sliders directly fit Speedway universal bucket seat mount frame and seat mounting plates (NOT INCLUDED) Can be used with other seat mounts and seat plates, though some may require modification Fit Just About Any Seat to Your Hot Rod or Muscle Car Our Universal Seat Slider Kit is the perfect upgrade to convert a fixed seating position in an older hot rod to an adjustable one to give the perfect seating position for driving enjoyment. Custom projects and DIY fabricated seat mounting frames can also benefit from using our Universal Seat Slider Kit to allow easier access to the rear seat, better driving position, and more. We do NOT include hardware to mount our seat sliders to your floor/seat mount or to your aftermarket bucket seats. The studs are 5/16-18 thread and one inch long, so you will need to pick up some 5/16-18 hardware (we recommend lock nuts or nuts/lock washer combination). The sliders provide a square hole at each end to accept a carriage bolt to secure a seat mounting bracket/flange (NOT INCLUDED) or to be inserted directly into the seat bottom if designed to do so. To clear the lock mechanism and prevent binding we suggest a 1/2-inch-tall steel or aluminum spacer (NOT INCLUDED) for clearance between the seat and sliders. This provides a 2-inch overall height to the assembly, something to factor in with your floor mount and seat base height to determine your final seat height. Alternatively, our may be your best option, as it includes everything to fabricate a custom seat mounting solution, so be sure to check that kit out as well. Whichever way you decide to mount these, adding a set of our Universal seat sliders will make the ride much more enjoyable! Ready to Rack up the Miles Our Universal Seat Slider Kit features a pair of ball-bearing supported seat sliders with pull wire assembly. These universal seat sliders allow up to 7 inches of seat movement to give you that Goldilocks feeling of sitting just right; not too close, or not too far from the steering wheel and pedals. Seat sliders are the perfect upgrade for easier rear seat access as well. The adjustable seat sliders feature individual locks for each side controlled by a single hand lever, making seat adjustments quick and easy without that “seat wiggle” a single locking seat sider can cause. Our Universal Seat Slider Kit is designed to be a direct fit with our but obviously can be used in any manner of custom fabricated seating configurations. The center-to-center distance on the mounting studs is 12 inches with the pull wire at its stock length, but the pull wire can be modified to bring the tracks closer or further apart as needed for your individual application. Charts (PDF) Specs Material Type Steel Sold in Quantity Pair Finish Natural Hardware Included No Overall Height 1.5 Overall Width 3.25 Overall Length 12.50 Centerline of Holes 11 MFG. Part # 91070026 Notes Seat sliders adjust 7 inches, overall width includes adjustment arm, and locking mechanisms on both sides Bracket Style Sliding Reviews Great Product Rated by Hot Rodder on January 18, 2022 Summary: I plan on using the seat sliders for my 1933 hot rod replica build and they will be used in combination with some custom angle iron brackets that will provide a recline to the seats. I have used these before for a MKII factory five cobra roadster build and they worked perfectly. Good item and best price around. Yes, I recommend this product. Worked perfectly at a fair cost Rated by Ron on December 31, 2021 Summary: I have a 1973 Fiat 850 Spider and the seat rails are nothing but metal against metal, it was cheap back then. The seats are somewhat adjustable but only after a lot of coaxing and X&X#$. These rails are a welcomed addition and now the seat is easily adjusted without fighting it. Bought a single set just to try it first and the results are better than expected have to order a second set for the other seat now. Yes, I recommend this product. Recommended Rated by Dale on October 09, 2021 Summary: Havent actually got them in place yet but all set up. Simple , compact, clean lines. Yes, I recommend this product. these tracks seem to be really well made. Rated by Jim on June 22, 2021 Summary: There are no seat tracks to be found made to fit a 60-65 Falcon/Comet. I believe the seat brackets can be modified to make these work easily enough. If it works out, i will let others know in the Falcon and Comet forums on facebook. Yes, I recommend this product. good product Rated by d on February 22, 2021 Summary: Used these to make my own sliders in my side x side had to weld a couple inches to them for mounting to chassis. turned out great, seats slide very easily and no rattling around. Solid mounts. Yes, I recommend this product. Related Items / Suggested Parts Universal Seat Mounting Frame, Slider and Mounts Speedway Universal Bucket Seat Frame Mount Bracket Universal Seat Mount Plates Tech Support We're here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help. About Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 72 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.

Price: 42.99 USD

Location: Lincoln, Nebraska

End Time: 2024-08-29T22:48:23.000Z

Shipping Cost: 0 USD