Kryptonite

Qty 2 Strong Arm 4101 Rear Trunk Lift Supports

Description: Qty (2) StrongArm 4101 Rear Trunk Lift Supports Buy with Confidence, backed by our 5 Year Warranty! This Listing is for 2 Supports which fit the Following Applications: 1983 Buick Riviera Base Convertible 2-Door Trunk 1979-1983 Buick Riviera Base Coupe 2-Door Trunk 1982 Buick Riviera Limited Edition Coupe 2-Door Trunk 1983 Buick Riviera Luxury Coupe 2-Door Trunk 1979-1980 Buick Riviera S Coupe 2-Door Trunk 1981-1983 Buick Riviera T-type Coupe 2-Door Trunk 1983 Buick Riviera Xx Anniversary Edition Coupe 2-Door Trunk 1979-1983 Cadillac Eldorado Base Coupe 2-Door Trunk 1979-1983 Cadillac Eldorado Biarritz Coupe 2-Door Trunk 1981 Cadillac Eldorado Brougham D'elegance Coupe 2-Door Trunk 1979-1983 Cadillac Eldorado Cabriolet Coupe 2-Door Trunk 1979-1983 Cadillac Eldorado Touring Coupe 2-Door Trunk 1979-1981 Oldsmobile Toronado Base Coupe 2-Door Trunk 1979-1983 Oldsmobile Toronado Brougham Coupe 2-Door Trunk 1980-1981 Oldsmobile Toronado XSC Coupe 2-Door Trunk 1979 Oldsmobile Toronado XSR Coupe 2-Door Trunk Specifications (See below for illustration): Extended Length: 8.25 Inches Compressed Length: 5.88 Inches Force: 850 = 191 Lbs. Shaft End Fitting: Eyelet Hole=8mm=5/16"=.312" w/Retainer Body End Fitting: Eyelet Hole=8mm=5/16"=.312" w/Retainer --> Qty (2) StrongArm 4101 Rear Trunk Lift Supports --> Actual Compressed Length 5.88" 8.25" Actual Extended Length Gas Charged Lift Supports are energy storage devices that create force by compressing gas inside a cylinder. Each support is tested to perform as well as the original units and, in many cases, to exceed the manufacturer's specifications. Important Notes about Lift Supports Each support is tested to perform as well as the original units and in many cases, to exceed the manufacturer's specification; please ensure you replace all the supports in the compartment at the same time to ensure proper performance. Lift supports loose pressure over time, even sitting on shelves in most auto parts stores and many of the inventory liquidators on eBay. Our business is lift supports, and we sell newly produced units, keeping our inventory fresh and rotated. Quite a few vendors on eBay are advertising Stabilus part numbers but with different vendor names. Please take a moment and be sure that what they are offering is the Stabilus. We stock several thousand different supports supplied by various quality manufacturers that are not listed here. We can build many units to your specifications if we don't have it. Don't hesitate to contact us with your requirements so we can research and find the best support suited to your needs. Special lengths, different pressures or ends, send us the information. Have an existing support with part numbers on it, and send us all numbers that you can find. We are confident our supports will exceed your expectations. Buy with Confidence, backed by our 5 Year Warranty! What is our Warranty on our merchandise? Depending on the product you are looking at, warranties will vary. Listed is our warranty on Lift Supports:Lift Supports for the Hood, Trunk, Hatch, Liftgate or Tailgate ( None Electrical types): Are covered with a Limited Buy with Confidence, backed by our 5 Year Warranty! A. Provided your original purchase was for a pair (unless your application only uses 1 lift support) B. These must be installed in the intended vehicle, and the unit stops working properly or to your satisfaction. Lift Supports for other Automotive applications other than Hood, Trunk, Hatch Liftgate or Tailgate and Non-Automotive applications, Tonneau covers, package delivery vehicles, vintage vehicles manufactured before 1980, All Electrical types and special projects are cover for 12 months. In the event the units stop performing after 180 days, then you would be responsible for shipping them to us and enclose a check for $13.90 per pair (for shipments inside the USA*) as well as proof of purchase from us to cover the return postage, and we will then send you the replacement unit. Please contact us for an RMA number before shipping the units. *Additional charges apply for international shipments as well as Puerto Rico, HAWAII, ALASKA & OTHER US TERRITORIES. Don't hesitate to get in touch with us for rates. THIS LIMITED WARRANTY DOES NOT COVER LABOR COSTS OR INCIDENTAL, INDIRECT, SPECIAL OR CONSEQUENTIAL DAMAGES SUCH AS, BUT NOT LIMITED TO, PHYSICAL INJURIES OR PROPERTY DAMAGE, LOSS OF TIME, LOSS OF USE OF THE VEHICLE, INCONVENIENCE, RENTAL VEHICLE CHARGES, TOWING CHARGES OR ACCOMMODATIONS RESULTING FROM A DEFECT IN OR FAILURE OF THE PART This policy is subject to change without notice. To Avoid the need for a warranty, try to handle your supports as noted below. "Shaft down" is the preferred orientation for mounting a Lift Support. An optimum design would permit the support to be oriented shaft down through its entire actuation. If this is not possible, then try to install it so that the shaft is pointing downward in the Closed Position. There are several reasons for this: To achieve the damping or "cushion" at the end of the Lift Supports stroke, the piston assembly inside the Lift Support must travel through oil at the end of the stroke. "Shaft down" orientation ensures that the oil is in the proper location for damping to occur. "Shaft down" orientation ensures that the shaft and sealing components are lubricated with every stroke of the Lift Support. This reduces seal wear and helps to inhibit corrosion. Depending on the application, "shaft down" orientation may reduce the rate of gas permeation through the seal, which increases the usable life of the Lift Support. Some reasons not to change the support orientation. 1. Vehicles with power openers must be installed in the same direction as they came from the factory. Sensors on the door are adjusted to work in the way they were programmed. Installing in the opposite direction can cause them not to work properly. 2. Some models of vehicles do not allow space for the cylinder to be reversed, and this will cause a binding when the door or window closes. An example of this is the Ford Excursion Rear Window (or liftgate) Please remember that the more often a cylinder is used, the longer it will last. Sitting dormant for any period allows the shaft to bind to the seal and eventually tear. If the application remains dormant, open the lift supports very slowly the first time they are used. The information provided is Subject To Change Without Notice Worry Free Ordering, Buy with Confidence! Check-Out Now! Click the Pay Now button at the top of this listing to immediately proceed with our checkout and payment process. Please note that the Pay Now button is ONLY available after winning an auction or completing a Buy It Now purchase. Check-Out Later If you do not choose to Check-Out now, eBay will notify you via e-mail that you are the winning bidder. There is no need to contact us to arrange payment. We will automatically send you an e-mail within three hours of an auction closing. Our message will contain a link to our simple and secure checkout system, where you can quickly and conveniently pay for your purchase. You may also continue purchasing additional items from our auctions or eBay store. You have 2 days from the end of the first purchase to add additional items to your order. Make sure all of your auctions have ended before checking out. All of your purchases will be consolidated into one checkout! Payment Cancellation & Payment issues: Please notify us via e-mail as soon as possible. No issue is too small, and we ask that you contact us before the sale gets to the point where you are in default. Once you have placed your order, unless we know there is a problem, it becomes final and subject to eBay's unpaid item policy. Shipping Orders Within the 48 contiguous states will be shipped: Using FedEx or USPS at our discretion. Orders to Puerto Rico, Hawaii, Guam, Virgin Islands, and other US Territories: Will be shipped via USPS Priority Mail. (For items listed with free shipping, this does not apply to these areas) APO, FPO, DPO: Orders are welcome, and we will be shipped via USPS Priority Mail. International sales are welcome: They will be shipped via USPS Priority Mail. Duties, Tariffs, and Taxes to countries outside the USA may be billed upon delivery, and we cannot assume or cover any of these charges. Please research this before ordering. USPS Shipping Delays to International Destinations: In most cases, orders are delivered within 10 working days and are shipped via USPS Priority Mail. Due to customs and postal issues, orders may be delayed several weeks and up to 60 working days, and we have no control over how they are handled. Please ensure that all shipping details are supplied to your address and are correct in the confirmation sent to you after placing the order. Express mail and FedEx International shipments are available, and we will gladly quote current shipping rates. Duties, Tariffs, and Taxes to countries outside the USA may be billed upon delivery, and we cannot assume or cover any of these charges. Please research before ordering. Customer Service Contacting Us: The best way to let us know if there are any issues or concerns is to send us an e-mail using the "ASK A QUESTION" link at the bottom of this listing. To be able to assist you quickly, we ask that you supply the following information. A) The e-mail address under which the order was placed. B) Any and all numbers or markings that are on your old supports. C) The part numbers on the actual supports you received. (This is not the number on the package but the actual supports.) D) The year, make, and model of your vehicle and any important details such as Convertible, with or without spoiler, or anything you think would be helpful. Photos of the issues are also great. Returns and Exchanges: If the return is due to an error in our listing, we will pay all shipping to correct the problem. If the return is due to an error on your part, you will be responsible for the return shipping and shipping for the correct units. If an exchange is necessary, please get in touch with us for an RGA number and return shipping address. Any items received without authorization are subject to delays and may not receive proper credit. If the product looks different than expected, do not install it; rather, contact us with the details so that we can make sure it is correct. Our return period is 30 days from the date you received the order, so please get in touch with us as soon as you see any issues. Products that have been damaged during installation or altered will not be accepted. Once a return is received and inspected, we will refund or exchange the item depending on what is worked out when the RGA number was sent to you. Normal handling is 2 business days from receipt of the item. Refunds will be applied to whatever the original payment method was. It may take several days to post to your account. Lost Or Damaged Packages: When a package is received damaged, open, or lost in transit, we must be notified within 7 days to work with the shipper to correct the issue.

Price: 45.95 USD

Location: Carlsbad, California

End Time: 2024-10-11T09:00:24.000Z

Shipping Cost: 0 USD

Product Images

Qty 2 Strong Arm 4101 Rear Trunk Lift SupportsQty 2 Strong Arm 4101 Rear Trunk Lift SupportsQty 2 Strong Arm 4101 Rear Trunk Lift SupportsQty 2 Strong Arm 4101 Rear Trunk Lift SupportsQty 2 Strong Arm 4101 Rear Trunk Lift Supports

Item Specifics

Return shipping will be paid by: Seller

Returns Accepted: Returns Accepted

Item must be returned within: 30 Days

Refund will be given as: Money back or replacement (buyer's choice)

Return policy details:

Brand: Strong Arm

Type: Parts & Accessories

Placement on Vehicle: Left, Right, Rear

Manufacturer Part Number: 4101

OE/OEM Part Number: 95012, 010190, 010209, 030215, 0762II, 10209, 4101, 614469, 72140, 8195224, 901305, F95012, P5819, SG430004

Color: Black

Finish: Painted Black

Interchange Part Number: 010190, 10209, 4101, 8195224, SG430004

Vehicle Location: Trunk

Fits: Buick Riviera 1979-1983, Cadillac Eldorado 1979-1983, Oldsmobile

Other Names: StrongArm

IPN 3: 72140,F95012, 95012,614469

Year Range: 1979, 1980, 1981, 1982, 1983

Recommended

2 pc Strong Arm 6260 Back Glass Lift Supports for SG329040 SG304099 901840 dv
2 pc Strong Arm 6260 Back Glass Lift Supports for SG329040 SG304099 901840 dv

$38.36

View Details
Back Glass Lift Support Strong Arm 6605 fits 03-05 Lincoln Aviator
Back Glass Lift Support Strong Arm 6605 fits 03-05 Lincoln Aviator

$17.99

View Details
2-Premium Trunk Lid Lift Support Strong Arm 4101  -  Brand New!
2-Premium Trunk Lid Lift Support Strong Arm 4101  -  Brand New!

$24.00

View Details
2 pc Strong Arm 4897 Hatch Lift Supports for SG430036 901032 Body bl
2 pc Strong Arm 4897 Hatch Lift Supports for SG430036 901032 Body bl

$32.74

View Details
2 pc Strong Arm Trunk Lid Lift Supports for 2008-2016 Mitsubishi Lancer Body ql
2 pc Strong Arm Trunk Lid Lift Supports for 2008-2016 Mitsubishi Lancer Body ql

$34.07

View Details
2 pc Strong Arm 6802 Trunk Lid Lift Supports for 844304GA2A 844304GA0A Body wu
2 pc Strong Arm 6802 Trunk Lid Lift Supports for 844304GA2A 844304GA0A Body wu

$35.72

View Details
2 pc Strong Arm 4247 Universal Lift Supports for SG359004 901270 Body zq
2 pc Strong Arm 4247 Universal Lift Supports for SG359004 901270 Body zq

$37.19

View Details
Lift Support  Strong Arm  4479
Lift Support Strong Arm 4479

$24.54

View Details
Qty 2 Strong Arm 4527 Fits 300M 1999 to 2004 Rear Trunk  Lift Supports
Qty 2 Strong Arm 4527 Fits 300M 1999 to 2004 Rear Trunk Lift Supports

$37.94

View Details
2 pc Strong Arm 4286 Hatch Lift Supports for SG229011 901446 6890835010 Body pc
2 pc Strong Arm 4286 Hatch Lift Supports for SG229011 901446 6890835010 Body pc

$43.96

View Details