Leupold VX-5 VX-6 throw lever (Low Profile) Carbon reinforced nylon Made In USA!

Description: Leupold VX-5 / VX-6, minimalist design throw lever. Designed from measurements taken from a VX-5 HD 2-10x42mm scope with the Firedot duplex reticle. As well as multiple VX-6 HD scopes (shown in photo 8). Both VX5 and VX6 share the same 41.14mm adjustment ring. Our levers are constructed from very durable Carbon-fiber reinforced Nylon utilizing a threaded heat insert and a hex-head fastener for retention to the scope. All hardware components are captured within the lever completing the light weight (0.2oz/7g), low profile design. Rounded edges ensure minimized snag potential on gear and smooth overall operation. This lever creates a positive consistent feel with bare hands or gloves. Installation is as simple as removing any lens cover or cap you may have installed, completely remove the provided 3mm lever screw with a hex key wrench, then slip the lever gently over the eyepiece end of your scope. Reassemble by indexing the lever accordingly on the tab of your adjustment ring. Complete the install by re-inserting the 3mm screw and lightly squeezing the lever sections together then slowly tightening the hex screw down till the locater tab is seated and the fit is just snug on the adjustment ring. The hex bolt should be about a 1/4 past snug for tightness. *Inner diameter: 41.14 +/-mm. *Weight: 0.2oz/7g —- For more information on our products and conceal carry options please visit our our website www.dcholsters.com Leupold VX-5 VX-6 HD Throw Lever, Constructed in the USA From Carbon reinforced nylon. Condition is New. Shipped with USPS Ground Advantage. VX-5, VX-6, HD, Leupold, Throw, lever, switchview, switch, view, Firedot, CDS dial. Nylon, carbon fiber, Proudly made in the USA! Thank you for looking! Pat. Pend

Price: 18.25 USD

Location: Bellingham, Washington

End Time: 2024-11-25T06:51:59.000Z

Shipping Cost: N/A USD