Description: This is an external soft key for your Heathkit amplifier. Why risk going inside your amplifier to install a raw circuit board? Why risk damage to your amplifier if you didn't do it correctly? Why risk opening up a high voltage amplifier to install such a mod? Why waste money on an interface that is gone when you sell your amplifier? Our RBI-1A will provide isolated safety to your radio keying circuit ALL FROM OUTSIDE THE AMPLIFIER! Be aware, the SB-200 (and some other amplifiers) has 120 volts present on the RELAY jack that will damage your radio keying circuit if you do you use a protective buffered interface For safety, turn off your amplifier and follow the directions below.We provide an RCA cable to go from the output of our RBI-1A to the "RELAY" jack of your amplifier. Connect 12 vdc (center of DC plug is positive) to your station 12 vdc power supply. Connect your radio keying line to the RBI-1A input, included RCA-RCA cable (We make cables for almost every Ham transceiver made in separate listings if needed). We also make a "BYPASS" or "STANDBY" switch for any amplifier that does not have one or if you want a convenient under shelf mounted switch in separate listings. What is included? RBI-1A with DC power cable and DC plug High braid quality RCA cable x2 Also note: THE RBI-1A IS UNIVERSAL YOU CAN USE IT WITH ANY RADIO* TO ANY AMPLIFIER**, so when you change radio or amplifier, you do not waste money since you can use the RBI-1A as described below. * - ANY radio that can provide a ground on transmit ** - ANY amplifier requiring a closure of contacts 73, Dan W7RF QRZ good
Price: 69.95 USD
Location: Fort Collins, Colorado
End Time: 2024-03-19T21:25:58.000Z
Shipping Cost: 5.95 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: Hamgadgets
Type: Soft Key Adapter
Model: Soft Key Heathkit
