Gtechniq HALO Flexible Film Protective Coating

Description: Gtechniq HALO Flexible Film Protective Coating - PPF and Vinyl Wrap 30ml QUICK OVERVIEW Lasts up to two years on PPF and vinylMakes surface easier to maintainCan be used on gloss, satin and matte finishesWhy use Gtechniq HALO Flexible Flim Coating? HALO enhances the performance of Paint Protection Film (PPF) and vinyl. It’s a chemically bonding, ultra-dense flexible film that becomes the permanent surface of the film – protecting it from the elements a car faces on a daily basis. The density of the coating and its low surface energy improve dirt and water repellency of PPF or vinyl. It also helps to prevent staining from dirt ingression, as well as reducing yellowing caused by UV rays. Overall, HALO keeps the PPF looking in a much better condition and makes it much easier for people to keep their car clean following PPF/ vinyl application. Rigorous real-world and laboratory testing has proven HALO to be compatible with all types of gloss, matte, and satin vinyl and PPF. It is also proven to work on self-healing films. Storage and use: Shake bottle well and wear glovesTo apply HALO, your vehicle must be indoors and remain indoors, for at least 12 hours after the coating has been applied. For best results, good lighting is essentialIf applying to previously installed film, wash and decontaminate the vehicle with Gtechniq W5 Citrus All Purpose Cleaner and W6 Iron and General Fallout RemoverSpray a 30% dilution of isopropyl alcohol (IPA) on to a Gtechniq MF1 ZeroR Microfibre Buff ClothWith your surface fully cooled, buff to remove any fingerprints or other surface contaminants. This process ensures you get the maximum number of chemical bonds between HALO and the film or vinylApply HALO evenly on the application pad and set the bottle asideApply with applicator provided in overlapping strokes to an area roughly 2’x2’, or work to the bodylines of the vehicleAfter coating a panel, remove residue with an MF1 clothAfter coating a panel remove residue with an MF1 cloth. Always remove from further than you have applied, working from the outside inOnce applied carry out a final check with an MF1 cloth and a bright but diffused light source – this will ensure no residue remains on the surface. Allow the coating to cure for at least one hour and repeat the application process so that all film and vinyl is coated with two layers of HALOAn unopened bottle of HALO has a 12 month shelf life from the time of purchaseStore in a cool/dry place, out of direct sunlightUse within 3 months of opening

Price: 63.58 USD

Location: United States, United States

End Time: 2024-09-29T12:51:41.000Z

Shipping Cost: 0 USD