GKTECH SR20DE/SR20DET High Performance Engine fan

Description: GKTECH SR20DE/SR20DET High Performance Engine fan - 60% more air flow S13, 240sx Over 10,000 sold! This is probably the single best cooling mod you can do to your car!The GKTECH high-performance engine fan has been designed and engineered by our in-house team of engineers with the intention of pulling more air than the factory item.When tested on a dyno the GKTECH high-performance fan took less than half the time to cool down from 90 degrees to operating temperature (good for next time you're on the start line at the track).Super easy to install, simply remove your factory fan (4 bolts) and install the new fan, it is a direct replacement clutch fan to suit SR20 and KA24's - Direct replacement of the standard fan- Pulls 60% more air than the factory SR20/KA24 fanWe do sell an RB/ VG specific fan which can be seen here: https://us.gktech.com/rb-skyline-gt-r-high-performance-engine-fan-40-more-air NOTE: Can NOT be used in conjunction with Nismo engine mounts on an S13/180sx/240sx as the mounts raise your motor approximately 0.78" (20mm) which will make our fan hit your radiator shroud (our fan is 0.59" (15mm) larger in diameter than the OEM SR20 fan) however S14/S15’s with Nismo engine mounts are fine and our fan will fit.NOTE#2: Do NOT trim the clutch fan if it comes close to intercooler piping. When installing the fan ensure that there is at least 10-20mm's clearance between the fan and anything around it, keeping in mind that your engine moves when under acceleration and braking. GKTECH SR20DE/SR20DET High Performance Engine fan - 60% more air flow S13, 240sx Over 10,000 sold! This is probably the single best cooling mod you can do to your car! The GKTECH high-performance engine fan has been designed and engineered by our in-house team of engineers with the intention of pulling more air than the factory item. When tested on a dyno the GKTECH high-performance fan took less than half the time to cool down from 90 degrees to operating temperature (good for next time you're on the start line at the track). Super easy to install, simply remove your factory fan (4 bolts) and install the new fan, it is a direct replacement clutch fan to suit SR20 and KA24's - Direct replacement of the standard fan - Pulls 60% more air than the factory SR20/KA24 fan We do sell an RB/ VG specific fan which can be seen here: https://us.gktech.com/rb-skyline-gt-r-high-performance-engine-fan-40-more-air NOTE: Can NOT be uséd in conjunction with Nismo engine mounts on an S13/180sx/240sx as the mounts raise your motor approximately 0.78" (20mm) which will make our fan hit your radiator shroud (our fan is 0.59" (15mm) larger in diameter than the OEM SR20 fan) however S14/S15’s with Nismo engine mounts are fine and our fan will fit. NOTE#2: Do NOT trim the clutch fan if it comes close to intercooler piping. When installing the fan ensure that there is at least 10-20mm's clearance between the fan and anything around it, keeping in mind that your engine moves when under acceleration and braking. × × × × FAQs What's the advantage of having more air flow? We tested the clutch fan on a test vehicle in a controlled environment (on a dyno) with back to back tests and from 194 degrees fahrenheit it took less than half the time to go from 194 degrees fahrenheit to idle operating temperature. Will this fit my car? Please refer to the confirmed vehicle list in the item description. We do not sell any items that aren’t listed on our website and if we haven’t confirmed fitment on your car, then we don’t know if it will fit or not. Please do not ask. How do clutch fans compare to thermo fans? If you've ever been to the track with thermo fans you know that unless setup with a shroud and setup correctly, they're useless. Clutch fans with the standard shroud are the way to go. What's the weight on the clutch compared to the standard item? The standard clutch fan is 16.33'' in diamater and weighs in at 1.41lbs. Our new design is 16.92'' in diameter and coincidentally also weighs 1.41lbs. What is the clutch fan made of? The clutch fan has a metal center (like the factory unit) and is made of ABS plastic (like the factory unit). Will I lose any engine power with the fan pulling more air? No, with our dyno tests on the same car within 30 minutes of each test with multiple runs made we actually GAINED around 1% in power with the new clutch fan installed. The cause of this? There was less heat soak and everything was running cooler. This all sounds too good to be true! This isn't rocket science but we'll let you be the judge. Try it out, guaranteed 100% it'll blow you away (see what we did there! ha!). But seriously, this is one of our favourite products and before you go any buy any other cooling related parts, this is the one that will make the biggest difference. Which way do I install it? The fins on the fan are to taper back towards the engine. Compatibility NISSAN S13 KA24 HATCH S13 KA24 240SX S13 SR20 240SX HATCH S13 SR20 240SX/SILVIA S14 240SX/SILVIA S15 240SX/SILVIA BUY NOW Shipping calculatorinfocosts Click here to get a shipping quote Click the Shipping & Payments tab above the listing description for more info FREE Local PickupShipping Price: (local shipping) See more... - - - - - - - - - Click the Shipping & Payments tab above the listing description for more info! Additional delivery notes PICK UP OPTION Our items are available for pick-up. Pick up procedure is as follows: Purchase the item through eBay Email us to coordinate pickup PICK UP OPTION Sorry, our items are NOT available for pick-up. PAYMENT Immediate payment is required upon selecting "Buy It Now" or upon checking out through the cart. We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay. We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus). The applicable amount of sales tax charged to an order will be calculated based on the shipment destination's state and local sales tax laws. Thank you for shopping with us on eBay! Immediate payment is required upon selecting "Buy It Now" or upon checking out through the cart. We accept payment via All Major Credit Cards (Visa, Mastercard, AMEX, Discover), Google Pay, PayPal, & Apple Pay (on mobile & eBay App). Thank you for shopping with us on eBay! eBay should update your Freight cost into the checkout process once you have committed to purchase. If checkout gets stuck and does not allow you to proceed, simply use your browser's Back button to return to the Pay Now option and try again. Paying via money order Simply add the freight cost to the item cost and forward the total amount to the address to be provided following your purchase. Paying via Direct Deposit Simply add the freight cost to the item cost and forward the total amount to the address to be provided following your purchase. Additional Information No additional information at this time Ask us a question --> You might also like GKTECH S chassis to Z33 Banjo to Banjo braided clutch line OEM replacement GKTECH S/R Chassis OEM Rear Knuckle Spherical Bushes - 30.5mm (PAIR) GKTECH S14A 200SX (Kouki) Radiator Cooling Side Panels (Pair) GKTECH Z33 350z/G35 Skyline Solid transmission mount -Stiffen up your drivetrain Contact To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist. Ask us a question © GKTech USA Shipping & Payments Click the Shipping & Payments tab above the listing description for more info Payment Accepted Payment Methods Immediate payment is required upon selecting "Buy It Now" or upon checking out through the cart. We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay. We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus). The applicable amount of sales tax charged to an order will be calculated based on the shipment destination's state and local sales tax laws. Thank you for shopping with us on eBay! Returns Returns are accepted Items must be returned within 30 days of the auction ending Buyer will pay for return shipping. eBay integration by

Price: 109 USD

Location: Albuquerque, New Mexico

End Time: 2024-08-27T07:04:44.000Z

Shipping Cost: 0 USD