Fits Seastar HC5345 Front Mount Hydraulic Steering Cylinder Seal Kit Replacement

Description: Fits Seastar HC5345 Front Mount Hydraulic Steering Cylinder Seal Kit Replacement Details FITMENT: This HS5157 Front Mount Hydraulic Cylinder Seal Kit is designed as a replacement front seal for pivot/front mount cylinders. COMPATIBLITY: Fits Parts: for HC5340, HC5341, HC5342, HC5343, HC5344, HC5345, HC5346, HC5347, HC5348, HC5358, HC5365, HC5375, HC5394, HC5445, HC6750, HC6751, HC6752, HC6753, HC6754, HC6755 Cylinders. HS5157 KIT CONTAINS: Two seals/caps (one for each end of cylinder body), a spanner wrench tool needed to remove seal caps, all necessary o-rings. SUPERIOR MATERIAL: Made of high-quality aluminum, steel, rubber, can be used for a long time use in marine environments., will not rust and wear. High precision ensure years of trouble-free use. FUNCTION: Used to repair leaking or weeping cylinder seals. Rebuild the outboard front mount hydraulic cylinders, preventing the leaking of fluid and optimizing efficient performance Model Reference:Seal Kit for HC5345, HC5340 and HC5342 (threaded end gland), HC5347 (Pivot Cylinder, Honda 115-130 specific), HC5348 (Pivot Cylinder, OMC 77-90 specific), HC5365 (Compact Cylinder (threaded end gland)) and HC5394 (SeaRay Compact Cylinder (obsolete) (threaded gland)). Please Noted: Please make sure your cylinder shaft is not pitted or corroded. A damaged cylinder shaft may still leak even with new seals. Using Instruction: 1. Loosening the Seal Gland. Turn the outboard hard to port; place the pin wrench in the holes of a gland. And use a 5⁄8-inch box wrench on the nut on the port end of the piston rod. (NOTE:Turn counterclockwise on the pin wrench with opposite pressure on the box wrench to loosen the seal gland) 2. Removing the Support Bracket. Use a 3/4-inch socket wrench to remove the nut and washer securing the support bracket to the support rod. (Do the same to the piston rod nut and washer. ) Use wrenches on the opposite ends to keep the rods from turning. With hardware gone, pull off the support bracket. 3. Use the pin wrench to remove the Old Seal Gland. 4. Install the New Seal Gland. Place the tapered guide tool from the kit on the end of the piston rod and lubricate it and the piston rod well with oil or grease. Carefully slide the new seal gland over the guide and onto the piston rod until it reaches the cylinder. Screw the seal gland into the cylinder, but don't tighten it yet. Remove the guide tool; it is not part of the final assembly, but you will need it for the other side. 5. Reinstall the Support Bracket. Reconnect the support bracket to the support rod and piston rod and replace the washers and nuts, tightening the nuts against the washers. You may need to use wrenches on the opposite nuts to tighten sufficiently. 6. Tightening the New Seal Gland. Use the pin wrench to tighten the new seal gland while using a 5⁄8-inch box wrench on the starboard end of the piston rod for counter torque. Packaged Included: 2 x Seals/caps (one for each end of cylinder body) 1 x Pin Wrench Tool (Needed to remove seal caps) 8 x O-rings Kindly Reminder: -- Please allow minor errors due to manual measurement. Thanks for your understanding. -- Monitors are not calibrated same, item colour displayed in photos may be showing slightly different from the real object. Please take the real one as standard. -- If you have any problems or concerns, please contact us, we are always there. -- If you have any questions please E-mail us, We will be happy to help you. (Provide the perfect solution) -- If an item is defective or taking longer than usual to reach you, or you think that the product did not meet the expectations you requested, please do not leave a negative feedback. Send us a message through eBay and we will resolve the issue problem. Thanks for your understandings.PAYMENTDELIVERYRETURNSCONTACT USFEEDBACKPAYMENT Payment must be received within 7 business days of auction closing. We ship to your Paypal address. Please make sure your Paypal address is correct before you pay. Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched. DELIVERY We will dispatch items within 1-2 working day after receiving cleared payment ,and You will receive it in 3-5 working days. (Saturday and Sunday excluded.) If you have any questions about your shipping, please do not hesitate to contact us .Our customer service will try our best to resolve the issue for you. Our stock levels will vary from time to time. Order will only be completed once payment is cleared. To avoid the situation of stock shortage, it is best to complete the order as soon as possible. Once the payment is cleared, 98% of the products are dispatched within 1 business day. Please allow 5-10 business days for it to arrive. We are not liable for any unidentified payments or delays of delivery due to failure to follow instructions during checkout. RETURNS If any item is defective upon receipt or do not work, please contact us for the return address, return is accepted within 30 or 60 days after the buyer receiving the item. Returned item has to be in its original condition. Buyer is responsible for return shipping costs . After receiving the return we will make a replacement depends on our available stock, if not available, a refund will be issued. CONTACT USIf you have any questions, then kindly please contact us via the ‘Ask a question’ Tab which is located on the bottom of the listing page. Thank you for shopping with us and we hope to see you soon! FEEDBACKWe maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns. It is impossible to address issues if we do not know about them! On Jul 9, 2024 at 23:14:27 PDT, seller added the following information:

Price: 24.39 USD

Location: Ontario, California

End Time: 2024-09-10T05:08:55.000Z

Shipping Cost: 0 USD