Description: DIRECTIONS FOR USE It is a violation of Federal Law to use this product in a manner inconsistent with its labeling. This product is intended for use in controlling bacteria and algae in spas. This product must be added directly to the surface of circulating water according to the directions. It is recommended that spas and hot tubs be drained every 30 – 90 days, more often if under heavy use. Reentry into treated spas is prohibited above levels of 3 parts per million (ppm) of chlorine. Start Up: Before using this product, make sure that the filtration system is clean and operating properly. Adjust the pH of the water to a range of 7.2 – 7.6 using suitable products and a reliable test kit. Adjust the alkalinity of the water to 125 ppm based on a test kit reading. Add a sufficient amount of this product directly to the surface of circulating water to raise the free chlorine level in the water to 5-6 ppm (mg/L) based on a test kit reading. Addition of one ounce of this product for each 1,000 gallons of water will increase the free residual chlorine by 4 ppm (mg/L). Maintenance: Add this product daily or as needed to maintain the free chlorine residual in the water at 1 – 3 ppm (mg/L) as indicated by a reliable test kit. Weather and usage effect sanitizer levels. Maintain the pH at 7.2 – 7.6 and the alkalinity at a range of 125 ppm. Addition of ½ ounce of this product for each 1,000 gallons of water will increase the free residual chlorine by 2 ppm (mg/L).
Price: 54.99 USD
Location: Granada Hills, California
End Time: 2024-09-09T20:10:08.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Form: Granule
EPA Registration Number: 36284-11-75538
Product: Water Treatment
Country/Region of Manufacture: United States
Suitable For: Hot Tubs
