【Buy 3 Pay 2】ANYCUBIC Standard UV Resin Tough DLP ABS-Like Plant-Based Resin Lot

Description: ANYCUBIC Standard UV Resin ANYCUBIC Standard Resin V2 High Strength & High Toughness Based on the classic Anycubic standard resin, the Anycubic standard resin V2 further enhances toughness, boasting an increase of 93% in elongation at break. The finished models are resistant to impact, durable, and less prone to breaking, while still maintaining a certain degree of flexibility. Wide Application As an entry-level resin, Anycubic Standard Resin V2 with a high success printing rate at the same time, is suitable for printing high intensity models that require high strength and toughness, such as industrial parts, assemblies, tools, architectural models, prototype proofing, figure design, etc. Anycubic Standard Resin V2 Resin Parameters UV Wavelength 365-405nm Elongation at Break 25-30% Density 1.05-1.25g/cm³ Molding Shrinkage 4.3-5.6% Viscosity 250-350cPimPa·s Flexural Strength 40-50MPa Hardness 80-83D Felxural Modulus 1500-2100MPa Tensile Strength 35-45MPg Heat Deflection Temp 60-65℃ Bottom Exposure Time 20-40s Resin Wash Alcohol Normal Exposure Time 1.5-3s Shelf Life 1.5 Year ANYCUBIC Plant-Based Resin Low Odor Anycubic Plant-based Resins are made from soybean oil without the BPA and benzene harmful chemicals. No VOCs, and no pungent odor, please feel free to enjoy printing. Use More Safety Through RoHS and REACH testing, complied with EN 71-3:2013 safety standard. Anycubic Plant-based Resin is safer than many other resins, but we suggest wearing gloves and masks, and maintaining indoor ventilation during printing to avoid skin allergy. Truly Eco-friendly Based on the market demand for green, safe and eco-friendly resins. Anycubic Plant-based Resin was launched to meet users' need, and it is made from soybean oil extract, truly environmentally friendly. ANYCUBIC Water Washable Resin ANYCUBIC UV Tough Resin High Toughness, Not Easy To Break Balancing softness with strength, Anycubic UV Tough Resin can withstand bending, flexing, and compression. The test module, uncured resin, has a size of 10mm*4mm*80mm, showing it is not easy to break while bending. Good Tensile Strength and Elongation The drilling test shows Anycubic UV Tough Resin has the capability of crack resistance, good strength and elongation and can resit chipping, cracking and stress mark due for cyclic vibration movement. The resin is tested on a module with a size of 10mm*4mm*80mm, the curing time is within 5 minutes, and the elongation at break can reach 40%. Shock Proof, Safe from Falling Parts printed with Anycubic UV Tough Resin are crash-proof and display high impact strength. Besides, it can quickly recover shapes from bending, withstanding high impact and other high strength mechanical pressure. - Video Display - ANYCUBIC DLP Craftsman Resin Specially Developed for DLP 3D Printer In September 2021, Anycubic Photon Ultra became the first consumer 3D printer with DLP technology in the industry. In 2022, Anycubic made an important leap in DLP technology, Anycubic Photon D2 came out. And this DLP Craftsman Resin is developed to take full advantage of its high-precision printing. DLP Printing Deserves Better Resin The precision benefits of DLP technology deserve better resins. When discussing 3D printing, most people focus on the resolution of 3D printer. But experienced makers know that the materials used are as important as the printer in order to make the final results look good. Ceramic Powder for More Details In ordor to help makers obtain more detailed 3D printed items, Anycubic DLP Craftsman Resin is launched to meet their needs. Nano - scale microcrystalline ceramic powders are added, which enhance the scattering of light within the resin, making the resin more sensitive to light and improve the fineness of the surface. Extremely High Precision Anycubic DLP printer built the same 3d model twice respectively with DLP Craftsman resin and general resin for comparison. When zooming in ten times to the surface of the model, we can see that the DLP Craftsman resin appears to have a smooth and exquisite surface, while general resin gets a blurred surface with obvious layer lines. Fast Speed, Low Shrinkage Due to the upgraded formula, Anycubic DLP Craftsman Resin can improve the printing speed and lower the shrinkage rate of 3d models. The first exposure time can be as fast as 35 seconds, and the normal exposure time can be as fast as 2 seconds per layer. Molding shrinkage is as low as 3.7%. Extra Long Shelf Life Other resin products on the market have a shelf life of only 1 year. Thanks to the upgrade of formula, the shelf life of Anycubic DLP Craftsman resin is up to one and a half years. To ensure your safety, please wear gloves before use to avoid direct contact with the skin and keep the room ventilated. ANYCUBIC ABS-Like Resin V2 Excellent Toughness, Durability and Well-Performance With its high toughness, strength, and impact resistance, the Anycubic ABS-Like Resin V2 is good for printing structural parts, tools, and other models that demand high performance. The printed models are suitable for drilling and tapping. Recommendation Index Improved toughness, more resistant to bending. Durability The final model shows excellent resistance to drops guaranteeing stability and durability. Moreover the model's durability is enhanced. The printed model can endure exposure to the natural environment for a year without cracks after proper cleaning and curing. No Cracking Experimental Data The experimental results show that the models printed with Anycubic ABS-Like Resin V2 can be stored for 3 years in natural environment without cracks after curing. Water Washable Easy to Post-Process Low viscosity and high fluidity facilitate cleanability and accommodate different cleaning methods like water, washing machine, and ultrasonic, catering to diverse scenarios. The cleaned model has a nonsticky surface, and the support is easier to remove. making post-processing less challenging. Resin Parameters UV Wavelength 365-405nm Elongation at Break 30-40% Density 1.1-1.2g/cm³ Molding Shrinkage 4.3-5.6% Viscosity 180-200cPimPa·s Flexural Strength 40-50MPa Hardness 80-85D Felxural Modulus 1000-1200MPa Tensile Strength 85-45MPg Heat Deflection Temp 60-65℃ Bottom Exposure Time 20-40s Resin Wash Water/Alcohol Normal Exposure Time 1.5-3s Shelf Life 1.5 Year ANYCUBIC ABS-Like Resin Pro 2 ANYCUBIC High Clear Resin ANYCUBIC High Speed Resin On Jun 21, 2024 at 19:27:32 PDT, seller added the following information:

Price: 26.99 USD

Location: NJ/CA

End Time: 2024-07-23T09:16:45.000Z

Shipping Cost: 0 USD

Product Images

【Buy 3 Pay 2】ANYCUBIC Standard UV Resin Tough DLP ABS-Like Plant-Based Resin Lot

Item Specifics

Restocking Fee: No

Return shipping will be paid by: Seller

All returns accepted: Returns Accepted

Item must be returned within: 30 Days

Refund will be given as: Money back or replacement (buyer's choice)

MPN: Does Not Apply

Brand: ANYCUBIC

Model: 405nm UV resin

Manufacturer Warranty: 12 Months

Features: For LCD，High Precision，Quick Curing

Specification 1: High Precision

Specification 2: Quick Curing

Specification 3: Rigid & Toughness

Specification 4: Bright Colors

Specification 5: For LCD

Material: Resin monomer, photoinitiator

Filament Diameter: No

Compatible Model: Photon M3 Max

Color: Multicolor

California Prop 65 Warning: No

Hardness: 84

Solid Density: 1.05-1.25g/cm³

Tensile Strength: 36-52 Mpa

Viscosity(25°C): 150-200 mpa.s

Characteristics: Rigid & Toughness，Bright Colors

Main Material: Resin & Photoinitiator

Elongation: 11-20%

Solidify wavelength: 355-410nm

Exposure parameters: normal exposure time(s) 5-15s

Warranty: 12 months

Price: 35.99 USD

Available Quantity: 323

Quantity Sold: 5

Color: Tough Resin 2.0

Price: 35.99 USD

Available Quantity: 100

Quantity Sold: 0

Color: Tough Resin 2.0

Price: 35.99 USD

Available Quantity: 20

Quantity Sold: 0

【Buy 3 Pay 2】ANYCUBIC Standard UV Resin Tough DLP ABS-Like Plant-Based Resin Lot

Product Images

Item Specifics

Available Variations

Color: DLP Craftsman Resin

Color: DLP Craftsman Resin

Color: DLP Craftsman Resin

Color: DLP Craftsman Resin

Color: Water Washable Resin

Color: Water Washable Resin

Color: Water Washable Resin

Color: Water Washable Resin

Color: High Speed Resin

Color: UV Resin

Color: Water Washable Resin

Color: UV Resin

Color: UV Resin

Color: UV Resin

Color: UV Resin

Color: UV Resin

Color: UV Resin

Color: Plant-based Resin

Color: Plant-based Resin

Color: Plant-based Resin

Color: Plant-based Resin

Color: High Clear Resin

Color: ABS-Like Resin V2

Color: ABS-Like Resin V2

Color: ABS-Like Resin V2

Color: ABS-Like Resin Pro 2

Color: ABS-Like Resin Pro 2

Color: ABS-Like Resin Pro 2

Color: ABS-Like Resin Pro 2

Color: ABS-Like Resin Pro 2

Color: ABS-Like Resin Pro 2

Color: Standard V2 Resin

Color: Standard V2 Resin

Color: Standard V2 Resin

Color: Standard V2 Resin

Color: Standard V2 Resin

Color: Standard V2 Resin

Color: Standard V2 Resin

Color: Plant-based Resin

Color: Tough Resin 2.0

Color: Tough Resin 2.0

Color: Tough Resin 2.0

Color: Tough Resin 2.0

Color: Tough Resin 2.0

Recommended

ANYCUBIC Photon Mono M7 Pro 170mm/h 10.1'' 14K Resin LCD 3D Printer+2KG Resin

ANYCUBIC Wash and Cure 3 Plus Station Size-Upgrade Wash Cure Machine LCD 3D

Anycubic 3D Printer Kobra Neo, Pre-Installed 3D Printers with Direct Drive Extru

ANYCUBIC PHOTON S 3D RESIN PRINTER W/POWER CORD (WCP013385)

【Refurbished】ANYCUBIC Kobra Max Auto Leveling FDM 3D Printer 400x400x450mm

【Buy 3 Pay 2】ANYCUBIC ABS-Like Resin Pro 2 Excellent tensile For LCD 3D Printer

AnyCubic Photon 5.5 3D Resin Printer

【Repaired】ANYCUBIC Photon Mono M5s 3D Printer 12K High Precision 7.8x8.5x4.8"

[BUY 10 PAY 6] ANYCUBIC 1KG PLA+/PETG/Silk/Matte/High Speed PLA 3D Filament Lot

【Refurbished】ANYCUBIC LCD 3D Printer Photon Mono 2/Photon M3 Max/M5s 12K Lot