Description: Browning A-Bolt 3 / AB3 Long Action Picatinny Rail 0 MOA Evolution Gun Works This mount fits: Browning A-Bolt 3 Long Action This mount does not fit: Browning A-Bolt Browning X-Bolt Browning A-Bolt Mountain Titanium in .300WSM. Please verify that your gun is an AB3. Locate the serial number and identify the last three digits. They represent the following rifles: - 351 is and A-Bolt II or I (original A-Bolt) - 358 is the AB3 - 354 is and X-Bolt (THIS MOUNT DOES NOT FIT THE X-BOLT) Specs: Rail Type: One Piece Picatinny Machined from: Domestic 6061 T6 Extruded Aluminum Finish: Matte Black Anodizing Center Spread: 3.862" Overall Length: 7.064" Height: .4" (Top of Receiver to Top of Picatinny) Weight: 2 oz. AB3 Long Action (A-Bolt 3 Uses #8 Screws) Quick Disconnect Ring Compatible: No Ambidextrous: Yes Torque Specs: 20 in/lbs Mounting Hardware: #8-40 X 1/4 Screws and T-10 Bit Included What is an A-Bolt? It could be an A-Bolt or an A-Bolt II or possibly even an AB3. The A-Bolt was built in two main series. The original A-Bolt and the A-Bolt II. Both are very similar rifles and are considered part of a design family. The new AB3 - sometimes also referred to as an A-Bolt - is a different model and design. Accessories, such as bases and rings, magazines, etc. made for the original A-Bolt and A-Bolt II will not fit the AB3. All three of these designs are totally separate from the X-Bolt rifle as well. To identify which rifle you have, you will either need to 1) know the serial number or 2) answer a few questions about the rifle. In a few seconds, you can easily determine what Browning rifle it is. This mount comes standard with a bevel on both sides making it ambidextrous. We recommend measuring the hole spacing in your receiver to confirm it matches with the dimensions we have published. Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount. Also, in many cases, it will not obstruct usage of factory iron sights. Our one-piece scope mounts are the obvious choice for hunters and tactical shooters alike. We machine these in our shop using one of our machining centers. After machining, the mounts are tumbled, sand blasted, and Type II anodized for long lasting durability. Installation: We recommend 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately). We recommend: 0 MOA - if shooting 0-500 yards 20 MOA - if shooting 500-1000 yards When zeroing your rifle with a 20 MOA mount, we recommend zeroing at 200 yards. The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA. Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov. Please note not all parts are "drop in". As with all gun parts some installations may require disassembly and reassembly. Some parts may require installation by a qualified gunsmith. !!ALWAYS MAKE SURE YOUR FIREARM IS UNLOADED BEFORE PERFORMING ANY MAINTAINANCE OR UPGRADES!! No Liability is expressed or implied for damage or injury which may result from improper installation or use of this product. This product should be installed and checked by a qualified gunsmith. Not doing so or using the wrong tools may damage the part and/or your firearm. All Products are made in the USA by Americans. Should you have any questions or issues with your new product please contact me. It is my goal to make my customers 100% satisfied with their purchase (within reason). ***Please Note: All returns MUST Be In Original Packaging and in a resalable, brand new condition. Item(s) must be in new/unused/unworn condition for an exchange/refund. Application errors will incur a minimum of 15% restocking fee. If you are not sure of the product and its use please contact The Sporting Jack for applicability and questions. Used and/or damaged items must be exchanged through the specific manufacturer for warranty issues. If you have any questions or Issues, we are here to help. The Sporting Jack Outfitters is a Certified Service-Disabled Veteran-Owned Small Business. Thank you for your business-Dave Kravetz
Price: 35.99 USD
Location: Victor, New York
End Time: 2024-09-19T16:13:02.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Return policy details:
Brand: Evolution Gun Works
Type: Scope Bases
For Gun Make: Browning
For Gun Type: Rifle
Gauge/Caliber: all
Material: Aluminum
Model: 43400
Mounting: Picatinny
Mounting Location: Reciever
Sport/Activity: Shooting
California Prop 65 Warning: WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Color: Black
Country/Region of Manufacture: United States
Features: Lightweight
Handedness: Ambidextrous
Item Height: .4
Item Weight: 3.8
Item Width: . 0.835 inches
Manufacturer Warranty: Lifetime
Set Includes: Screws and Torx Bit
Unit Quantity: 1
Unit Type: each
MPN: 43400
