BASSBOSS AT212-MK3 Dual 12" Powered Top Active Loudspeaker

Description: The AT212-MK3 is a very high-output, self-powered, internally processed, bi-amplified, 2-way, broadrange loudspeaker. The cabinet is lightweight, the setup is easy and the output is smooth with a natural, musical character. The remarkable power and efficiency of the AT212-MK3 make it ideal for providers who want to deliver high sound pressure levels but prefer not to move heavy cabinets. Intended for use with a subwoofer system to complete a 3-way active full-range system, the AT212-MK3 has a tall, slim design that allows the HF horn to stand above crowds when the cabinet is stacked on subwoofers. The light weight of the cabinet makes stacking by one person possible. The AT212-MK3 cabinets weigh only 99 lbs. The AT212-MK3 is a vented cabinet that features two high-efficiency 12" woofers. The woofers feature 3.5" voice coils, Neodymium magnets, cast aluminum baskets and ultra-light cones. The compression driver also features a Neodymium motor structure with a 3" voice coil. It is mated to a 1.4" throat, cast aluminum horn. The horn is rotatable, providing 80 x 60 degree coverage for multiple applications including ground stack and horizontal or vertical flying. The AT212-MK3 is the ultimate in plug and play, with universal voltage compatibility and no need for any outboard gear, other than a sound source. The built-in processing features presets that allow it to run in multiple configurations. Each preset offers advantages that suit specific applications and preferences. Power is supplied by an amplifier that can deliver output peaks of 163V, to provide amazing dynamic resolution and impact. The fully integrated and comprehensive digital processing ensures smooth response and reliable operation thanks to meticulous filter alignments and five-stage limiters that protect the drivers from excessive excursion, thermal overload and clipping. The amplifier features a large heat sink and 2 temperature-controlled fans to ensure consistent operation, even under the most extreme conditions.The cones are waterproofed to protect them from accidental exposure to moisture such as rain or spilled beverages. Weather resistant, IP65 rated power connectors, an internally sealed input section and waterproof-treated cones are provided to allow operation where rain might be encountered. The cabinet is built from 18mm and 15mm Birch plywood. It features an 18mm baffle and 18mm top and bottom, with 15mm sides, port walls and braces, all assembled with dado joinery. The cabinet includes 4 steel bar-handles, 4 internally braced steel M10 fly points and a 35mm (1-3/8") cast metal pole socket. Although the AT212 cabinet is equipped with a 35mm steel pole socket, DO NOT use this speaker on a tripod or extension pole. This socket is to be used with a special, short section of pole to prevent it from moving once stacked on a subwoofer. The MK3 features an all-new DSP. The comprehensive suite of processing includes multiple presets, each including multiple protection systems and limiters to prevent driver overload in as many ways as possible, including thermal, excursion and clipping. There are five levels of protection that actively prevent overheating of the voice coil, minimize long-term thermal compression and limit excursion. Because they operate in 5 different modes, the limiters are sophisticated enough to have a largely unnoticable effect on the transient response and allow the subwoofer to deliver peak output safely. Each preset has a specific high-pass filter frequency and alignment filters that ensure it's output is always phase coherent with any BASSBOSS sub. No matter which preset you choose, your BASSBOSS subs and tops will always play in harmony. The full-range mode, Preset 1, provides response down to 50Hz (-3dB). Each successive preset filters the lows out at higher frequencies. As low-frequency demand is reduced, higher sound levels can be achieved, allowing the AT212-MK3 to be used above multiple subwoofers. Not including Cardioid, there are up to 56 possible combinations when MK3 tops are used with MK3 subs, but don't worry, all are compatible. You can't choose a "wrong" preset, you simply choose the combination you like best.The new DSP features an Ethernet interface. This can be used to control the cabinets from a computer or to load software or firmware updates. The ethernet connectivity, in conjunction with the new DSP board, will allow signal to be sent via Milan AVB. (Firmware updates will provide access to this feature.) Within the software, multiple cabinets can be grouped together, allowing them to respond to commands simultaneously. This permits the levels of groups of loudspeakers to be adjusted together, and yet independently from the levels of other groups of loudspeakers. In addition to individual and grouped level controls, presets can be loaded and signal levels and temperatures can be monitored. Each cabinet includes a two-port switch, so multiple cabinets can be chained on the same data cable. The MK3 DSP features storage capacity of up to 100 presets, eight of which can be accessed at the touch of a button with no need for a connected computer. The eight directly accessible presets are compatible with all the presets in the MK3 Top Boxes and are also compatible with previous generation tops and subs. BASSBOSS AT212-MK3 Dual 12" Top Active Loudspeaker Features: AT212-MK3 Dual 12" Powered Top Mighty mobile mover will shake up the place with roaring output. Practicality is your specialty. You've run every system under the sun, and you can really appreciate functional design, ease of use and a total lack of fuss. You know there are situations where a line-array isn't the best option. Because you want to roll in, rock it, then roll out. Because a tall, thin, loud, clear, lightweight loudspeakers are timeless, classic workhorses. Because loud is good. Because you need something bigger and louder than a speaker that's designed to go on a pole. Premium quality doesn't require a gimmick. Here a timeless design is brought up to date with premium processing. High-sensitivity drivers combined with big power provides high SPL. The presets ensure everything contributes seamlessly and safely. You get two high-sensitivity 12" neodymium woofers with 3.5" voice coils, a neo compression driver with a 3" voice coil, a cast aluminum 80 x 60 degree rotatable horn, a solid Birch cabinet with handles and fly points. The 3200 Watt amplifier and a premium-grade DSP come with network remote control. There are all-new amplifiers in the MK3 series. Total power has increased, however power allocated to woofers increased substantially. The higher output voltages provide more impact. Universal input voltage compatibility of 90-250V provides more flexibility. Waterproof connections provide more peace-of-mind. The MK3 features an all-new 96kHz DSP. The pushbutton presets have doubled, from 4 to 8, and up to 100 presets can now be stored in the DSP and loaded via LAN. The comprehensive suite of processing includes meticulously tuned equalization, all necessary high-pass and low-pass filters, as well as multiple protection systems and limiters to prevent driver overload in as many ways as possible. ControlBASS software supports an essentially unlimited number of possible BASSBOSS-developed or customized user presets which integrate seamlessly and coherently with all other BASSBOSS products for effortlessly perfect setups. The latest in DSP programming developments can be added via easy remote updating. Each AT212-MK3 Retail Box Includes: (1) BASSBOSS AT212-MK3 Dual 12" Powered Top Active Loudspeaker(1) 15' (5m) Power Cable(1) Manual(1) Warranty Card

Price: 4995 USD

Location: Ronkonkoma, New York

End Time: 2024-02-24T18:26:12.000Z

Shipping Cost: 0 USD