"BACK OFF" Decal Window Sticker Auto Truck Motorcycle Die-Cutz 3613

Description: "Back Off" Die-Cutz BRAND : Chroma - PlasticolorCondition : New, with possible light shelf wear The decal is about 5.25 inches wide by about 4.00 inches high at the longest points For Auto/Truck/Motorcycle/Home PLEASE BE SURE THAT THE SURFACE YOU INTEND TO PUT THIS ON IS CLEAN AND SUITABLE FOR PLACEMENT OF THE EMBLEM. Instructions per manufacturer : Decal Application Instructions 1. Wash hands to remove any dirt or oil. 2. Clean mounting surface. 3. Peel decal away from package background. 4. Lightly place decal on mounting surface. 5. Starting from the center out, rub firmly to secure the decal bond. Die-Cutz Application Instructions 1. Wash hands to remove any dirt or oil. 2. Clean mounting surface. 3. Remove decal from packaging. 4. Separate backing from decal making sure to leave the decal attached to the top transfer tape. 5. Lightly place decal on surface. 6. Starting from the center out, rub firmly with fingers to secure the decal bond. 7. Remove the top transfer tape leaving only the decal. Sunscreenz Application Instructions Tools Required: masking tape, scissors, hobby knife, hair dryer, credit card or squeegee. Notes: * This product has two layers: paper back liner, vinyl decal. * It may require two people for proper installation of this product. * A heat source such as a hair dyer may be used to make the vinyl pliable for fitting convex surfaces (do not overheat). 1. Wash hands to remove any oil or dirt. 2. Clean mounting surface. 3. Position the entire product on mounting surface. 4. Run a strip of masking tape down the center of the decal onto the mounting surface, both top and bottom. This will create left and right mounting halves which will hold the entire product (both layers) in place while mounting. 5. Lift the left half up, stopping at the center, next to the masking tape. Peel the Paper Back Liner away from the Vinyl Decal. 6. Cut away the left half Back Liner with scissors. 7. Starting from the center, use a Credit Card with a sweeping motion up and down to mount the left side of the decal. Use tension to follow the contour of the windshield. (A heat source may be used to make the stretching Sunscreenz follow contour of windshield). 8. Remove the masking tape. Remove the Back Liner from the right side of the decal and repeat mounting procedures for the left side. 9. Carefully trim away excess material with a Hobby Knife (do not cut the rubber sealer for the windshield). Xpressionz Application Instructions Tools Required: masking tape, scissors, credit card or squeegee Note: This product has three layers: clear back liner, vinyl decal, clear top carrier. 1. Wash hands to remove any oil or dirt. 2. Clean mounting surface. 3. Position the entire product on mounting surface. 4. Run a strip of masking tape down the center of the decal past the carrier onto the mounting surface, both top and bottom. This will create left and right mounting halves which will hold the entire product (three separate layers) in place while mounting. 5. Lift the left half up, stopping at the center next to the masking tape. Peel the Clear Back Liner away from the Vinyl Decal and Clear Top Carrier. Make sure the Vinyl Decal and Clear Top Carrier stay together. 6. Cut away the left half Back Liner with scissors. 7. Starting from the center, use a Credit Card with a sweeping motion up and down to mount the left side of the decal with the carrier still bonded. 8. Remove the masking tape and repeat steps 5-7 for the right side of the decal. 9. Carefully remove the Clear Top Carrier leaving the attached decal to the mounting surface. Disclaimer per packaging : This product contains aggressive adhesive. Having no control over the end use of this product, nor the users ability or judgement handling it, Chroma nor their distributors accepts any responsibility nor shall be liable for damage of any type related to the use of this product. No warranty exists; either expressed or implied. The photo used in this listing may be a stock photo unless otherwise noted. All items are being sold as-is with no warranty through us written or implied. We do not offer exchanges, or refunds of any kind. We have MANY other unique and interesting items currently on Ebay. You may view all items by clicking "view sellers other items". Thanks for viewing my item.PaymentPayment will be accepted through immediate Pay-Pal payment only.ShipmentItem will ship within 1-2 business days from full cleared payment. Item will ship via USPS delivery method of your choosing. If you do not change the shipping method during checkout, it will automatically pick USPS First Class.WHEN CHOOSING YOUR SHIPPING METHOD, PLEASE TAKE THE FOLLOWING INTO CONSIDERATION :DOMESTIC SHIPPING AFTER CLEARED PAYMENTUSPS FIRST CLASS PACKAGE : UP TO 7 BUSINESS DAYS FOR DELIVERYUSPS PARCEL SELECT : UP TO 9 BUSINESS DAYS FOR DELIVERYUSPS PRIORITY MAIL : UP TO 5 BUSINESS DAYS FOR DELIVERYUSPS EXPRESS MAIL : 1-2 BUSINESS DAYS FOR DELIVERY INTERNATIONAL SHIPPING - ESTIMATED ONLY AFTER CLEARED PAYMENT (CAN BE HELD UP BY CUSTOMS/ETC.)INTERNATIONAL BUYERS ARE RESPONSIBLE FOR ALL DUTIES, CUSTOMS FEES AND TAXESUSPS FIRST CLASS MAIL INTERNATIONAL : UP TO 30 BUSINESS DAYS (LIMITED TRACKING)USPS PRIORITY INTERNATIONAL : UP TO 21 BUSINESS DAYS (LIMITED TRACKING)USPS EXPRESS INTERNATIONAL : 5-14 BUSINESS DAYS (TRACKING)

Price: 17.99 USD

Location: Hoagland, Indiana

End Time: 2024-08-22T14:57:07.000Z

Shipping Cost: N/A USD