Athearn 72166 HO Scale RTR EMD SD40T-2 "Primed for Grime" Southern Pacific SP 83

Description: Athearn 72166 HO Scale RTR EMD SD40T-2 "Primed for Grime" Southern Pacific SP 8370 DCC Sound Athearn 72166 HO Scale RTR EMD SD40T-2 "Primed for Grime" Southern Pacific SP 8370 DCC Sound The SD40T-2 is a 6-axle diesel-electric locomotive built by General Motors Electro-Motive Division having a 16-cylinder EMD 645E3 diesel engine producing 3,000 horsepower (2,240 kW). 312 SD40T-2s were built for North American railroads between April 1974 and July 1980. This locomotive and the SD45T-2 are popularly called tunnel motors, but EMD’s term is SD40-2s with “cooling system modifications” because they were designed for better engine cooling in tunnels. The difference between this locomotive and its non-tunnel motor cousin, the SD40-2, are the radiator intakes and radiator fan grills located at the rear of the locomotive. The radiator air intakes in this model were along the deck to allow more fresh, cooler air to enter and less hot exhaust fumes lingering around the tunnel’s ceiling. FEATURES: #8370 Red welded/removed nose gyralight snoot nose relocated Nathan P-3 Horn standard forward ditchlights cab roof mounted bell faded paint missing/faded body and nose lettering SD40T-2 SERIES LOCOMOTIVE FEATURES: Fine scale handrails Separately applied air tanks See through cab windows Welded ECAFB Photoetch windshield wipers LED Lighting HTC truck sideframes All-wheel electrical pickup See-through dynamic brake fans “Mushroom” nose vent on right side Separately applied wire grab irons Fully assembled and ready-to-run Rubber trainline and MU hoses with silver ends Standard Dash-2 cab, windows correct per prototype See-through radiator grilles with new rear truck gearbox specific for the tunnel motor Speed recorder attached to appropriate axle per prototype (except undecorated) McHenry scale knuckle spring couplers Highly-detailed, injection molded body Painted and printed for realistic decoration All-wheel drive with precision gears for smooth and quiet operation 5-pole motor with flywheels and multi-link drivetrain for troublefree operation DCC Ready 21-pin NEM Quick Plug™ technology Nickel plated, blackened machined wheels Wheels with RP25 contours operate on all popular brands of track Replacement parts available including motor brushes Recommended radius: 22” SOUND-EQUIPPED MODELS ALSO FEATURE Onboard Econami Sound by SoundTraxx Sound units operate in both DC and DCC Sound units operate in both DC and DCC All functions NMRA compatible in DCC mode Full DCC functions available when operated in DCC mode Some functions are limited in DC Engine, horn, and bell sounds work in DC Slow speed control All functions NMRA compatible in DCC mode CV chart included in the box Excellent Slow speed control Effect lighting (if applicable) using F5 and/or F6 Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights Many functions can be altered via Configuration Value (CV) changes PRIMED FOR GRIME MODELS FEATURE Faded base colors matched to the prototype, the perfect starting point for adding grime and rust Patches applied and shaped per road number matching each corresponding side to the prototype Duplicated look and feel of “In Service” equipment; “Tattered and Torn” just like the real thing Some Prime for Grime models feature paint scheme variations Athearn 72166 HO Scale RTR EMD SD40T-2 "Primed for Grime" Southern Pacific SP 8370 DCC Sound Athearn 72166 HO Scale RTR EMD SD40T-2 "Primed for Grime" Southern Pacific SP 8370 DCC Sound The SD40T-2 is a 6-axle diesel-electric locomotive built by General Motors Electro-Motive Division having a 16-cylinder EMD 645E3 diesel engine producing 3,000 horsepower (2,240 kW). 312 SD40T-2s were built for North American railroads between April 1974 and July 1980. This locomotive and the SD45T-2 are popularly called tunnel motors, but EMD’s term is SD40-2s with “cooling system modifications” because they were designed for better engine cooling in tunnels. The difference between this locomotive and its non-tunnel motor cousin, the SD40-2, are the radiator intakes and radiator fan grills located at the rear of the locomotive. The radiator air intakes in this model were along the deck to allow more fresh, cooler air to enter and less hot exhaust fumes lingering around the tunnel’s ceiling. FEATURES: #8370 Red welded/removed nose gyralight snoot nose relocated Nathan P-3 Horn standard forward ditchlights cab roof mounted bell faded paint missing/faded body and nose lettering SD40T-2 SERIES LOCOMOTIVE FEATURES: Fine scale handrails Separately applied air tanks See through cab windows Welded ECAFB Photoetch windshield wipers LED Lighting HTC truck sideframes All-wheel electrical pickup See-through dynamic brake fans “Mushroom” nose vent on right side Separately applied wire grab irons Fully assembled and ready-to-run Rubber trainline and MU hoses with silver ends Standard Dash-2 cab, windows correct per prototype See-through radiator grilles with new rear truck gearbox specific for the tunnel motor Speed recorder attached to appropriate axle per prototype (except undecorated) McHenry scale knuckle spring couplers Highly-detailed, injection molded body Painted and printed for realistic decoration All-wheel drive with precision gears for smooth and quiet operation 5-pole motor with flywheels and multi-link drivetrain for troublefree operation DCC Ready 21-pin NEM Quick Plug™ technology Nickel plated, blackened machined wheels Wheels with RP25 contours operate on all popular brands of track Replacement parts available including motor brushes Recommended radius: 22” SOUND-EQUIPPED MODELS ALSO FEATURE Onboard Econami Sound by SoundTraxx Sound units operate in both DC and DCC Sound units operate in both DC and DCC All functions NMRA compatible in DCC mode Full DCC functions available when operated in DCC mode Some functions are limited in DC Engine, horn, and bell sounds work in DC Slow speed control All functions NMRA compatible in DCC mode CV chart included in the box Excellent Slow speed control Effect lighting (if applicable) using F5 and/or F6 Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights Many functions can be altered via Configuration Value (CV) changes PRIMED FOR GRIME MODELS FEATURE Faded base colors matched to the prototype, the perfect starting point for adding grime and rust Patches applied and shaped per road number matching each corresponding side to the prototype Duplicated look and feel of “In Service” equipment; “Tattered and Torn” just like the real thing Some Prime for Grime models feature paint scheme variations × × × Buy now and save! Tell a friend Visit store Watch now Postage info Click the Postage tab above the listing description for more info Click the Postage tab above the listing description for more info! Additional delivery notes PICK UP OPTION Sorry, our items are NOT available for pick-up. PAYING VIA PAYPAL We accept PayPal on our all our items so you can shop with confidence. Simple choose the PayPal option when proceeding through the checkout. Additional Information No additional information at this time Ask seller a question You might also like Kadee HO Scale #10, Bulk Pack Kadee #5 Couplers (10 pair) Tangent 25518-08 HO Scale 86' Auto Parts Boxcar Grand Trunk Western GTW 305774 Tangent 25518-05 HO Scale 86' Auto Parts Boxcar Grand Trunk Western GTW 305759 Tangent 25518-03 HO Scale 86' Auto Parts Boxcar Grand Trunk Western GTW 305742 Contact To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist. Ask seller a question © White Rose Hobbies Postage Click the Postage tab above the listing description for more info Payment Accepted Payment Methods PayPal Returns Returns are accepted Items must be returned within 30 days of the auction ending Buyer will pay for return shipping. eBay integration by

Price: 219.99 USD

Location: York, Pennsylvania

End Time: 2024-11-20T14:34:49.000Z

Shipping Cost: N/A USD