Apex Tactical - Durable Striker for FN 503 / 509 / FNS Series

Description: Apex Tactical Durable Striker Part #: 119-186 Material: Heat treated tool steel and finished in Nickel Teflon Fits: Works in all variants of the FN 509, FNS-C, FN 503, and FNS pistols Brand new & factory sealed The Apex Durable Striker for the FN 509 Series pistols is a direct drop-in replacement for the factory striker. This striker has been tested and certified for dryfire on an empty chamber up to 100k strikes. You read that right - certified for 125,000 dry strikes. This Striker is the culmination of over 3 years of continued R&D and testing. Through the R&D process, we’ve cataloged more than 1 million dry fires to prove out the design. The sear catch geometry has been improved to produce a crisp trigger break while maintaining sear to striker engagement. These strikers are machined from heat treated tool steel and finished in Nickel Teflon for ultimate lubricity and wear resistance. The Apex Durable Striker includes a proprietary buffer (to be installed into the slide) which dampens the shockwave created by dryfiring. A 6mm x 60mm Socket Head Cap screw is included for use as a removal tool for cleaning and maintenance needs. Installation requires the following factory striker components: (These are factory components which can be removed from your factory striker and used with ours). striker spring stopstriker spring stop pinstriker return spring, andstriker spring guide. Expected Results: 1) Direct drop-in replacement for the factory striker 2) Extremely long service life (Rated for over 125,000 dry fires) 3) Crisp trigger break When installed in conjunction with an Apex AEK Trigger Kit, the trigger pull weight averages 5.5lbs. When installed with the FN factory trigger system, the trigger pull weight averages 6.5lbs. Proudly Manufactured in the Free State of Arizona, by Apex. Springs: Mixing and matching different companies' springs/parts is a bad idea. We recommend using only the factory springs or Apex Slide Maintenance Kit with this striker. The use of another manufacturer’s spring kit is likely to cause malfunctions and we are unable to offer technical support if the end user is combining our parts with those of other companies. Parts in the Package: These parts are finished with Nickel Teflon (NiTef), in the processing of this finish, occasionally excess Teflon will remain on the surface of the parts. This CAN look like little white spots of mold. This is not Mold; it is excess Teflon from the coating process that will not hurt anything to be in there. There is no need to clean it out of your striker, but you’re welcome to if you prefer to do so. Cleaning and Maintenance: Once installed, the Durable Buffer should not need to be removed from your slide. The Buffer is made from chemical resistant polymer and can withstand most harsh cleaning chemicals. Cleaning may be done with a Cotton Swab and cleaning solvent. If you use compressed air to blow debris out of your slide, it is recommended that you do so cautiously as the buffer may fly out. If you choose to reinstall your factory striker, you will need to remove the Apex Durable buffer entirely. WE DO NOT RECOMMEND USING THE APEX DURABLE STRIKER WITHOUT THE BUFFER INSTALLED IN THE HOST SLIDE. Replacement buffers may be purchased from our Customer Service Team. For Use In These Guns Works in all variants of the FN 509, FNS-C, FN 503, and FNS pistols When we say all variants of 509, we mean all. Does Not Fit These Guns Not for use in the large frame FN striker fired pistols: FN 545 or FN 510 What's Included 1 ea. Apex Durable Striker 1 ea. Durable Striker Buffer 1 ea. Buffer Removal Tool Installation Resources Tools Needed for this project Installation: 3/32" Pin Punch1/16" Pin Punch Removal: Above listed tools plus...Buffer Removal Tool (included with Striker)

Price: 74.95 USD

Location: Haysville, Kansas

End Time: 2024-09-04T20:41:01.000Z

Shipping Cost: N/A USD