Description: Brand new spring packs for Automag classic style valves. These should fit any valve etched with Automag, Minimag and Micromag or any classic valves with an aftermarket back half, such as Diamond Labs. They will not work with any valve that contains the 2 nesting springs, such as RT, Retro, Emag, or X Valves. I assembled them using Bellville washers that matched as closely as I could find with the stock spring packs. These washers are a couple thousandths thicker than the stock ones. They have slightly more resistance and seem to be a little more sensitive when doing velocity adjustments. After testing these in my personal markers, they appear to work well in the classic valves with Lvl 7 or Lvl 10 bolts. The washer stack is captured on top by a standard fender washer and a small oring (3mm ID x 1mm). Extra orings will be included in the case that it needs replacing. It is important that you pay close attention to the way the washers are stacked if for some reason you disassemble these which should not be necessary and is not recommended. These are not Airgun Designs factory spring packs. They are not produced nor tested by AGD. I assembled these as a replacement since I personally needed some new spring packs and new ones are currently unavailable from AGD. I have not had any issues with them, but I cannot guarantee they will work exactly like a factory original spring pack in your valve. Please contact me here with any questions or find me on MCB under the same username.
Price: 25 USD
Location: Grant, Alabama
End Time: 2024-09-05T16:29:27.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: Unbranded
Type: Valve
Model: Automag
Suitable For: Paintball
