5pcs NE555 DIP-8 High Precision Oscillator Timer IC 555 8 Pin DIP IC Socket

Description: 5Pcs Pieces IC 555The NE555 are precision timing circuits capable of producing accurate time delays or oscillation. In the time-delay or mono-stable mode of operation, the timed interval is controlled by a single external resistor and capacitor network. In the a-stable mode of operation, the frequency and duty cycle can be controlled independently with two external resistors and a single external capacitor. The threshold and trigger levels normally are two-thirds and one-third, respectively, of VCC. These levels can be altered by use of the control-voltage terminal. When the trigger input falls below the trigger level, the flip-flop is set, and the output goes high. If the trigger input is above the trigger level and the threshold input is above the threshold level, the flip-flop is reset and the output is low. The reset (RESET) input can override all other inputs and can be used to initiate a new timing cycle. When RESET goes low, the flip-flop is reset, and the output goes low. When the output is low, a low-impedance path is provided between discharge (DISCH) and ground. The output circuit is capable of sinking or sourcing current up to 200 mA. Operation is specified for supplies of 5 V to 15 V. With a 5-V supply, output levels are compatible with TTL inputs. 5Pcs Pieces 8 Pin DIP IC Socket Adaptor Solder Type 2.54mm Pitch 7.6mm Row PitchSpecifications:Row to Row Distance: 7.62mm (0.3")Contact Termination: Through-HoleNumber of Pins: 8Pin Length: 2.9mm (0.11")Pitch: 2.54mm (0.1")

Price: 4.3 USD

Location: Richmond, Texas

End Time: 2024-01-18T16:46:07.000Z

Shipping Cost: 0 USD