Description: 4 Axis Stand-alone Offline CNC Motion Controller DDCSV4.1 CNC Machine System&MPG Ship From our USA warehouse Two options: Parcel include:1). If you choose "4 Axis Controller":1 × 4 Axis DDCSV4.1 CNC offline motion controller1 × 4GB USB flash drive1 × USB extension cable and other small accessories1 × parallel port link cable1 × Breakout BoardPdf. English User manual 2). If you choose "4 Axis Controller with MPG":Parcel include:1 × 4 Axis DDCSV4.1 CNC offline motion controller1 x 4 Axis Handwheel MPG with E-Stop1 × 4GB USB flash drive1 × USB extension cable and other small accessories1 × parallel port link cable1 × Breakout BoardPdf. English User manual Descriptions: Product description:DDCS V4.1 is a 4 axis offline motion controller upgraded on the basis of DDCS V3.1, V2.1 and V1.1. DDCS V4.1 continuedInheriting the consistent simple and efficient features of the DDCS series, and according to the shortcomings of DDCS V3.1, the algorithm has been improved, and the programming instruction rotation has been increased.Commands, etc., improve the simulation function, etc., support IO port configuration, etc., and improve the product function of the DDCS CNC controller as a whole, making it more functional.More stable and powerful, and more suitable for customer needs.DDCS V4.1 CNC system adopts ARM+FPGA design structure, ARM completes the man-machine interface and code analysis part, and FPGA completes the bottomLayer algorithm and control pulse generation part, fpga speed generator adopts 32-bit speed generator, which makes the resolution of speed and acceleration higher. AssumeReasonable design, reliable control and convenient operation, DDCS V4.1 enhances the product function and panel layout structure, but 17 keys can still complete all the de-machine control operation. DDCS V4.1 also supports the universal FANUC compatible G instruction set.1) 7-inch screen, 17 keys; 18 optocoupler isolated digital input interfaces, 3 optocoupler isolated digital input ports;2) The new version strengthens the algorithm, and introduces a new algorithm for motion planning, which makes the path of small line segments smoother through configurable contour errors;3) 1 channel 0-10V spindle speed control analog output interface, and the spindle can be configured as a servo spindle;4) 3-4 axis drive mode adopts differential mode and double pulse mode for customers to choose, the maximum output frequency of interpolation pulse is 500Khz;5) ARM9 main control chip, FPGA core algorithm chip;6) 7-inch TFT screen; size: 1024x600 pixels, resolution: 72 pixels/inch;7) The main control device is 24VDC power input, and the current capacity is required to be no less than 0.5A; the IO port power input is also 24VDC, and the current capacity must beIt is required to be no less than 0.5A; the main control power supply power supply control system, the IO port power supply power supply IO; when there is no power supply to the IO port, all IO ports are invalid;8) Support standard MPG;9) Support single-axis manual jogging and linkage and fixed-distance operation of panel buttons;10) Support running specified line and nearest point operations;11) Support floating tool setting, fixed tool setting, corner point setting and tool length measurement12) Supports array processing, sequential processing, plane milling and cylindrical milling;13) Support the offset adjustment of XYZA four-axis;14) Support pause breakpoints, power-off breakpoints and load breakpoints15) Support multi-workpiece origin operation, users can save origin and load origin as needed16) Support the centring operation of X and Y axis;17) Support simulation operation and during simulation, you can adjust the magnification to carefully observe whether the programming path is in line with expectations, and perform software limitBit check, you can pause at will during the simulation, after pressing the start button, the system will start execution from the simulation pause breakpoint18) The communication between the controller and the computer can be realized through the Ethernet connection port, which is convenient for operations such as file reading and copying;19) The memory of the controller is 1G; the G command can also be read from the U disk, and the file size of the G command is not required;speech pack;20) The language of the controller adopts international coding, and supports basically all languages. Customers can make various languages according to their own needs.21) DDCS V4.1 controller only supports NPN type limit switch;22) The use rights of the controller include operator, administrator and super administrator.DDCS V4.1 Stepper/Servo Control OutputThe stepper/servo control output,we cite differential Pulse and Direction output method.By the Para #012~015, the users can configurate the drive mode for the 4 axis.Max. output frequency is 500Khz, please take attention to the max. pluse input frequency of the driver.Limit, Home and Probe InputsThe digital input circuit has the mechanical limit switch connection method and the open collector of the triode connection method. It supports the NPN type proximity limit switch.The example above, we already set at Submenu “Input signal Para” in the Parameters page as:#151: X axis Home port is 03, then IN03 is the X axir home signal input port；#152: Y axis Home port is 06, then IN06 is the Y axir home signal input port；#153: Z axis Home port is 09, then IN09 is the Y axir home signal input port.#156: Probe Port is 13, then IN13 is the probe signal input port.Extended Function Inputs#250~#253 Extended function key functions: 0 "Start"; 1 "Pause"; 2 "XY Zero"; 3 "Z Zero"; 4 "Home"; 5 "Floatting probe"; 6 "Fixing probe"; 7 "Vertex probe"; 8 "X 1/2"; 9 "Y 1/2; 10 "extkey1.nc"; 11 "Disable". The users can select the function as they want.Take the example, how to defind the “Start”, “Pause” and “E-stop”Extended function to the external keys.By Submenu “Input signal Parameters” in the Parameters page:Set “#157 External emergency stop port” to No. 16 input port; Set “#158 Extended Function Key 1 Port” to No. 14 input port; “#159 Extended Function Key 1 Port” to No. 15 input port.Then set #250 to 0, then define input port 14 as “Start”; Set # 251 to 1, to defind the input port 15 as the "Pause".The users also can edit Macro to self-define the external key function by “extkey.nc“.The appendix also includes a list of macro definitions.READ MOREDDCS V4.1 Spindle control outputsDDCS V4.1 Support 2 kinds Spindle Mode: Analog Spindle / Servo Spindle (PUL+DIR). By Para #188 configurate the spindle as Analog or Servo Spindle, By Para #189 we select the servo spindle channel. Here we take the example of the analog spindle.The spindle control output ports （OUT01-OUT03） offer connections for Start and Stop of the Spindle (M3/M5), Start/Stop of Cooling (M8/M9), Start/Stop of Lubrication (M10/M11). These three output terminals are signals open to ground. The highest electric current can be absorbed is 50mA. The speed controlling output terminal can output 0-10V. It can adjust the speed of the spindle motor by sending the voltage between 0 and 10V to the VFD according the the Spindle Speed Setting.The above Figure shows the wiring with Sunfar VFD.1） The internal of the analog circuit is isolated from the IO power supply, and it is forbidden to short-circuit with IO power supply.2) M3 is the spindle forward rotation output or start-stop output;3) If the IO port is not powered, even if the inverter is connected correctly, it will not work; all IO ports must be powered to work properly.When the spindle mode is Servo spindle, we need to choose the servo spindle channel, and wire with according driver ports to the spindle servo driver.Needs two power suppliesCOM+ and COM- is the power input ports for Input/Output Port and MPG， 24V and GND is the power input ports for controller system. Please keep in mind,only when the two power supplies are connected correctly the controller can be work properly.The DDCS V4.1 is a small box that can fit in a window of a small control box or control cabinet.Four locking hooks fix this controller from the frame. The dimension you find in Figure 1-3.The front panel is 237mm * 153.7mm * 5.2mm；The main body is 237mm * 153.7mm * 48.2mm；To mount the unit in an equipment cabinet, cut the hole 228.5mm * 83.7mmNew features of DDCS V4.1 vs. DDCS V3.1:1) Added file transfer via Ethernet;2) The mapping axis function is added to the CNC function (can be used to configure the double-Y gantry structure machine);3) The spindle can also be configured as a servo spindle;4) Added bias adjustment;5) The polar coordinate programming command and rotation command are added to the command, and the radius compensation command is perfect;6) The motion planning introduces a new algorithm to make the path of small line segments smoother through configurable contour errors;7) A total of three detection functions are supported: corner detection, inner circle center detection, and outer circle center detection;8) Improve the specified line start function and the nearest point start function, no matter how large the file is, it can be quickly started within a few seconds;9) Improve the simulation function. During the simulation, you can adjust the magnification to carefully observe whether the programming path meets the expectations, and perform a software limit check., during the simulation can be paused at will, after pressing the start button, the system will start execution from the simulation pause breakpoint;10) In terms of input port, the port function can be configured arbitrarily, and the driver alarm support is added;11) For the a-axis, a cyclic encoder is added. The cyclic encoder is especially useful for processing files where a keeps growing;12) There is also a parsing error prompt. DDCS V3.1 has never been there, and if there is a parsing error, it will stop directly;13) The language adopts international coding, which supports basically all languages. The advantage is that it can be used as a language pack of various characters;14) Increase the emergency stop acceleration configuration parameter to solve the huge impact caused by the direct stop when the machine tool moves at high speed;15) FPGA speed generator adopts 32-bit speed generator, and the resolution of speed and acceleration is higher. 2. Pendant Handwheel MPG with Emergency stop with plug Description:1.The CNC 4 Axis handheld controller MPG Pendant with x1, x10, x100 selectable, You are bidding one complete unit of the MPG pendant with Emergency stop for 4 axis CNC machine, it equipped with our popular machined MPG unit with 4 axis and scale selector, LED indicator also send feedback from the CNC machine to user about the status of the unit. 2.All Wiring isolated from MPG unit and provide a easy to install wiring diagram, it suit both commercial machine as a replacement jog control unit or other computer based controller. Which add great control flexibility to the system. Specification:1. x1, x10, x100 switch2. X,Y,Z,4th axis selector switch3. LED indicator4. With Emergency stop5. High quality professional chassis6. 6ft extendable high quality shielded cable cord7. Magnetic base holder can place anywhere on the machine steel surface8. Required 5V+, 150mA, power for MPG9. Phase output is A ,/A and B,/B;10. TTL output, drive capability +-20mA;11. Support CNC system:Taiwan Pou Yuen M600 M500 M520i T300 series, Higerman, HANUC,GSK,opened NC, KND,Siemens, the NUM, Spain FAGOR (NEW, 8055I) and so on.12.Wiring:User can wire this unit to the CNC system with easy. Description:1) CNC system and position control of various mechanical devices, mainly for CNC machine tools and various mechanical zero correction and signal division.2) 100 times per revolution slightly cracking point,100 pulses per revolution output, holding the handle of the panel and all-metal high-grade design.3) Metal code disc, high precision, good texture4) Easy installation, shaped thin, ultra-light.5) DC 5V power system6) Voltage, single-ended, differential in three output options provide 100PPR pulse output options.7) Driver output type, anti-interference ability, long-distance transmission.8) Oil, water, dust-proof design (grade IP65) spiral stretch 20 million guaranteed. Features:1) Novelty, easy to move, interference, load capacity.2) Full plastic shell, insulation, high strength, anti-oil seal design.3) With × 1, × 10, × 100 third gear ratio, enabling 4-12 axis magnification switch4) With the control switch, emergency stop switch optional, easy to operate5) For CNC machine tools, printing machinery, numerical control equipment Specification:Resolution100PPRSupply VoltageDC5V +/-5%Supply Current≤80mAOutput Voltage≥2.5V≤0.4VOutput Current<40mAFall/Rise time≤5ns(typ)SwitchX1,X10,X100Axis SwitchOFF,X,Y,Z,4Response Frequency0-10KHzWeight560g Shipping Please open the package and check if there are some damages before sign, if there are some damages , please do not sign and contact us immediately Items will be shipped within 1-2 days upon the receipt of payment. Problem&Feedback Please give us the opportunity to resolve any problem when you have, we concern your problem and we will try our best to resolve it. We are a new member in ebay now, and need understand both of sides Pls email us before you want to leave any negative feedback Refund When you have the parcel, and not satisfied the goods or it is other problem like as broken,pls tell us the detail reason and provide the photos Any reason required for all refund. Item must be in it's original condition and no physical damage. Buyer responsible for all shipping cost Contact us Welcome worldwide customer inquire and questions, we will try to do our best to feedback customer’s email within 1-2 business days,if not pls check the mail box again Customer’s satisfaction is very important to us.
Price: 305 USD
Location: New York
End Time: 2023-11-23T07:49:51.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Brand: RATTM MOTOR
MPN: Does Not Apply
Available Variations
Color: 4 Axis Controller
Price: 305 USD
Available Quantity: 6
Quantity Sold: 0
Color: 4 Axis Controller with MPG
Price: 355 USD
Available Quantity: 12
Quantity Sold: 8
