1/2" 12VDC Normally Open Electric Solenoid Valve N/O 12-Volt DC water

Description: Quality valves from a real company — buy with confidence. Best warranty and parts availability. Ships within 24 hours from San Diego, California Multiple Shipping Options Free shipping General 1/2" NPSM ThreadNormally OPEN (N/O)2-way / 2-position valve Pilot operated diaphragm valve 11/32" (8.5 mm) internal orifice Coil / Electrical 12-Volt DC / 800 mA(24VDC available in our eBay store)Pressure and Temperature 3 to 90 PSI (0.2 to 6 BAR) 175° F (80° C) Max Media Temp Valve Materials Nylon valve bodyStainless Steel internal components NBR diaphragm Suitable Media WaterLow Viscosity FluidsNot recommend for Diesel or Gasoline Dimensions Height: 2-3/8" Length: 3-1/4" Width: 1-3/8" GENERALThis is a great general purpose valve for water and other low viscosity fluid applications. These valves are suitable for potable (drinking) water, but do not have any 3rd party certifications such as NSF 61. All the "wet" components are made out of FDA listed materials.Like most diaphragm-type valves, this valve requires minimum pressure (3 psi) to operate. It is intended to be used in pressurized systems, not in gravity feed systems. The pressure may come from city water pressure, pump etc.This valve has a 11/32" (8.5 mm) orifice so any restriction in your system should be relatively minimal.This valve uses a parallel 1/2" NPSM thread (commonly used on faucets). You should use a connector or fitting with a gasket or cone seal that creates a seal against the end of the inlet and outlet port rather than attempting to seal the thread itself. NORMALLY OPEN DESIGN This is a normally open valve. Normally open valves are "OPEN" in their de-energized state (i.e. when no electrical power is applied, the valve is open). Once the coil is energized, the valve closes. VALVE COIL / ELECTRICAL The valve coil is nylon encapsulated and is water resistant (but may not be submerged). The coil is rated for continuous duty, which means that the coil temperature will stabilize at a safe level and will not continue to rise indefinitely. As with most continuous duty rated valves, the coil may still get warm or even hot during long activation periods. This is completely normal for most solenoid valves. If your application requires extremely long activation periods, please contact us for additional advise. TECH SUPPORT / CUSTOMER SERVICE We care about our customers. Please contact us if you need any help or tech support! PARTS AVAILABILITY We carry repair kits and coils for most of our valves. Please contact us for pricing and availability. 12-MONTH WARRANTY Our warranty works without hassles. All replacements are quickly shipped from our warehouse in San Diego, California. You are responsible for the cost of shipping the defective item back to us; we gladly cover shipping cost back to you. If time is of essence, make sure to call us first. We understand that down-time can be expensive and we will do our best to work with you.Please note that diaphragms and coils are considered "wear and tear" items and are not typically covered by the warranty. 30-DAY RETURNS If you are not happy with our products for any reason, you may return them for a full refund (excluding shipping charges) within 30 days of the purchase. OEM CUSTOMERS AND LARGE QUANTITY ORDERS We work with Original Equipment Manufacturers (OEMs) on regular basis. Please contact us for OEM pricing and/or large quantity discounts. _gsrx_vers_520 (GS 6.6 (520))

Price: 15.99 USD

Location: San Diego, California

End Time: 2024-10-27T21:35:30.000Z

Shipping Cost: 0 USD