1 Qt. Indoor/Outdoor Carpet and Artificial Turf Adhesive

Description: For indoor and outdoor carpetCompatible with a variety of substratesUp to 48 hours curing time ROBERTS 6700 adhesive was designed for exterior or interior carpet installation and is a solvent-free for reduced health risks, a lower environmental footprint and high initial grab. This non-flammable adhesive may be used in areas where flammable adhesives pose a health risk due to fumes or flashback fires. Use this adhesive to adhere most indoor/outdoor carpets with polypropylene, rubber-backed (foam, marine, waffle), urethane and tufted, woven or non-woven/needle-bond backings.For adhering most indoor/outdoor carpets and is ideal for decks, sunrooms and basementsBonds with concrete, APA rated marine grade plywood, aged asphalt paving (hot applied), fiberglass and aluminum when surface is clean and roughened to promote bondingSuitable for indoor and outdoor useMoisture Control Adhesive - up to 5 lbs. MVER and 80% RHUp to 30 minutes open time, 60 minutes working time and 24 to 48 hours curing timeApproximately 65 to 75, 90 to 110 and 100 to 120 sq. ft. per gallon coverage for smooth, polypropylene/woven, and non-woven/rough-backed carpet installations respectivelySuggested for use with a 1/8 in. x 1/8 in. x 1/8 in. U-notch trowel, 1/8 in. x 1/8 in. x 1/16 in. V-notch trowel, or 3/32 in. x 3/32 in. x 3/32 in. V-notch trowel depending on carpet installation typeEnviro-friendly, solvent-free and LEED compliant; VOC Protected by GoldGuard, an antimicrobial protection system that inhibits the growth of mold, mildew and odor causing bacteria in both wet and dry adhesivesCRI Green Label Plus Certified - GLP no. 36471Non-flammable for safe use10 year direct bond limited warrantyRecommended for covered exterior applicationsMay be used for artificial turf if the turf manufacturer suggests a latex based, full spread adhesive application

Price: 16.88 USD

Location: Hialeah, Florida

End Time: 2024-08-25T13:02:47.000Z

Shipping Cost: 0 USD